Articles techniques et présentations

I introduce a model of fluidized reactor which, in presence of heterogeneous platinum-based catalyst, decomposes liquid formic acid producing gaseous mixture of carbon dioxide and hydrogen as the product. I treat the physical system as a (Class II) mixture of four constituents - namely ... En savoir plus

iCP (Nardi et al, 2014) is a software that couples two standalone simulation programs: COMSOL Multiphysics® and PHREEQC (Parkhurst & Appelo, 2013). The tool is ideal for applying multiphysics and geochemistry in Earth Sciences. Flexibility of the two coupled codes result in an ... En savoir plus

Steam methane reforming is a widely studied process because of its importance for hydrogen production. A two-dimensional membrane-reactor model was developed to investigate the steam-methane reforming reactions. The use of membrane as membrane-reactor separator offer us few advantages ... En savoir plus

Ventilation and Indoor Air Quality (IAQ) are issues of very high interest, determining comfortable conditions for occupants and no-contaminated local atmosphere. The aircraft cabins are more confined and have a higher occupant density than other indoor environments such as offices or ... En savoir plus

A biogas steam reforming reactor has been developed in order to be integrated into a proof-of-concept SOFC system, able to operate with biogas produced in an industrial waste water treatment unit. A mathematical model, aimed at describing the performance of the reactor, has been ... En savoir plus

The kinetic interface-sensitive tracers (KIS tracers) are used to give a partial picture of the spreading, mixing and plume migration of supercritical carbon dioxide (scCO2) in the deep saline aquifer by estimating the interfacial areas between scCO2 and brine during the injection of ... En savoir plus

Low temperature fuel cells require hydrogen of high purity for electricity production to avoid catalyst poisoning. To purify hydrogenrich flue gases from hydrocarbon steam reforming membrane shift reactors with a metal membranes may be utilized. A model of a tubular membrane shift ... En savoir plus

The aim of present work is to present and calibrate a new mechanistic model that includes physical and biokinetic processes to reproduce the algae growth in photobioreactor or ponds during long-term scenarios. A COMSOL Multiphysics® model is used to implement the microalgae processes ... En savoir plus

高温气冷堆中使用了大量的碳素材料，作为多孔材料，碳素材料含有一定水分等杂质。为了减小反应堆高温运行条件下的堆内材料腐蚀，高温堆在初装堆和事故后需要对一回路进行严格的加热除湿操作。目前一回路加热除湿主要是依靠主氦风机旋转，将动能转换为热能来提升温度。本文将采取另外一种方案，在蒸汽发生器处增加外加热源来加热一回路工质。基于大型商用软件COMSOL Multiphysics建立高温堆内一回路加热的流动传热模型，对两种加热方案的一回路升温过程作数值分析，为高温堆加热除湿方案的选择提供有益的指导。本文中使用的物理场为传热——共轭传热——湍流，多物理场耦合为非等温流动。 En savoir plus

Laser drilling of titanium and its alloys is widely used in aerospace industry, as it offers selective removal of material at high accuracy and speed. However, laser drilling often inherits defects such as large heat affected zone, micro cracks and recast layer. These defects depend upon ... En savoir plus