- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
In this conference we have brought together a community that is scientifically diverse in an event that allows for inspiring contacts about the use of COMSOL Multiphysics. It is an event to connect with the Spanish and Portuguese COMSOL Multiphysics users and participate in training ... En savoir plus
Injection of 3-D hot plume blob develops localized and short-term increases in slab surface temperatures, consistent with the Abukuma adakite, Northeast Japan. 3-D mantle flow develops trough of the lowered slab surface temperatures implying along lowered slab surface temperatures, ... En savoir plus
Metamaterials are periodic or quasi-periodic, sub-wavelength metal structures. The material properties are derived from its structure rather than inheriting them directly from its material composition. En savoir plus
Charge transport behavior must be considered in developing HVDC design. In microscopic level, the space charge and conduction mechanisms are related with energy band‐gap and shallow/deep trap distribution and these come from chemical defects, physical disorder and impurities or by ... En savoir plus
매설배관에서 나타날 수 있는 손상의 유형은 누설, 파단, 막힘 기계적 충격 에 의한 구조적 손상 누설 : 부식(일반부식, 공식, 미생물부식 등), 피로 파단 : 부식(일반부식, 공식, 미생물부식 등), 피로 막힘 : 부식에 의한 스케일, 수중서식물의 증식 등 콘크리트 파열 : 내부 강재의 부식(콘크리트 균열 및 탈리) En savoir plus
Abstract: A 3.2V/10Ah LFP aluminum-laminated batteries are chosen as the target of the present study. A three-dimensional thermal simulation model is established based on finite element theory and proceeding from the internal heat generation of the battery[13]. The study illustrates a ... En savoir plus
The reaction current density is an important process parameter of lithium-ion battery, significantly influencing its electrochemical performance. In this study, aimed at the discharge process of lithium-ion power battery, an electrochemical-thermal model was established to analyze the ... En savoir plus
Partial discharge (PD) is the most unwanted phenomenon in high voltage insulation system. It causes degradation to the equipment insulation leading eventually to the breakdown and system failure. One type of PD, called corona discharge, occurs due to the ionization of the air between ... En savoir plus
Micro-sized separation devices are in a state of research globally due to its simplicity; cost effectiveness and high precision for analyzing biological and medical samples, e.g. blood cells. Magnetophoresis is a technique to separate cells on biochip by manipulating the magnetic ... En savoir plus
A magnetic field study was used to investigate the current distribution in 0.5mm and 0.63mm diameter copper wires. In this study, the skin depth was investigated when 1A sinusoidal wave pass through the wire of 0.5 mm and 0.63 mm diameter with copper electrical resistivity and relative ... En savoir plus
