Articles techniques et présentations

A device for monitoring the oxygen consumption of cells has been developed, which consists of two parts; a cell culturing platform (CCP) and an oxygen sensing chip. The CCP possesses inlet and outlet pipes to direct the fluid under the test to the cell culturing chamber through the inlet ... En savoir plus

Laser drilling of titanium and its alloys is widely used in aerospace industry, as it offers selective removal of material at high accuracy and speed. However, laser drilling often inherits defects such as large heat affected zone, micro cracks and recast layer. These defects depend upon ... En savoir plus

This paper presents a multiphysics model to the convective, conductive and radiative heat transfer for the thermoelectric modules (TEMs), which are used to convert heat flux into electrical current. The model basically consists of heat transfer in solids, heat transfer in thin shells, ... En savoir plus

This work describes the design methodology and development of piezoelectric transducers for applications in fluids with COMSOL_Multiphysics. In these linear models for the acoustic-structure interaction approximate numerical solutions have been obtained. In order to perform the ... En savoir plus

A new experimental device has been developed in order to characterize the phase change material (PCM) thermal properties (thermal conductivity k, sensible and latent heat thermal energy storage, cp and Lf) in the solid phase, during the solid-liquid transition and in the liquid phase. It ... En savoir plus

高温气冷堆中使用了大量的碳素材料，作为多孔材料，碳素材料含有一定水分等杂质。为了减小反应堆高温运行条件下的堆内材料腐蚀，高温堆在初装堆和事故后需要对一回路进行严格的加热除湿操作。目前一回路加热除湿主要是依靠主氦风机旋转，将动能转换为热能来提升温度。本文将采取另外一种方案，在蒸汽发生器处增加外加热源来加热一回路工质。基于大型商用软件COMSOL Multiphysics建立高温堆内一回路加热的流动传热模型，对两种加热方案的一回路升温过程作数值分析，为高温堆加热除湿方案的选择提供有益的指导。本文中使用的物理场为传热——共轭传热——湍流，多物理场耦合为非等温流动。 En savoir plus

Enzymatic biofuel cells (EBFCs) are miniature, implantable power sources, which use enzymes as catalysts to perform redox reaction with biological fuels such as glucose. In this study using COMSOL Multiphysics, we use an EBFC chip, having three dimensional, highly dense micro-electrode ... En savoir plus

In this presentation, “Design and Analysis of MEMS-based direct methanol fuel cell,” there are three main model parts, two-dimensional two-phase mass transport model, μdmfc three-dimensional model and a novel cathode model. First, a two-dimensional two-phase mass transport model was ... En savoir plus

A Computational Fluid Dynamics study has been performed for a Gas Electron Multiplier (GEM) detector of high energy charged particles, currently under development as part of a new tracker of the high luminosity spectrometers in Hall A at Jefferson Lab. By gradual modifications of the ... En savoir plus

Throughout history, the copper pyrometallurgical processes have been carried out mostly in discontinuous or batch systems. In recent decades new continuous technologies have been developed but focused only on Smelting and Converting stages leaving aside the Refining one. In 2002 a novel ... En savoir plus