Articles techniques et présentations

The overall goal of this work is the use of COMSOL Multiphysics® in the modeling of the current density distributions for the electrodeposition of aluminum coatings from ionic liquids. The local current distribution is strongly dependant on the conductivity and on the geometry of the ... En savoir plus

In this work, we present the effective properties of nanodielectrics with gold (Au) nanoparticles embedded in polymer (Polyvinyl Pyrrolidone (PVP)) matrix, calculated by using finite element method (FEM) based simulation in COMSOL Multiphysics software. Drude model is used to calculate ... En savoir plus

A COMSOL model of a piezoelectric quartz double ended tuning fork gyroscope was implemented. The gyroscope has two detection modes; the first mode detects the angular velocity about a z-axis perpendicular to the tuning fork plane (x-y plane), while the second mode detects the angular ... En savoir plus

A Polysilicon H-beam is a micro-machined structure consisting of two primary members connected by a third member of much lower width and much greater aspect ratio. This structure exhibits interesting vibration behavior at specific frequencies which are known as resonant modes. A ‘mode’ ... En savoir plus

The paper presents simulations of uniform thickness and thickness-tapered types of piezoelectric vibration energy harvesters using COMSOL Multiphysics software. The simulated vibration energy harvesters have bimorph cantilever structure with end mass. Tapering the thickness of the ... En savoir plus

Ultrasonic sensors are commonly used for a wide variety of non-contact presence, proximity or distance measuring applications in industry, especially the automotive branch. This paper shows how the radiation properties of bending-type ultrasonic transducers with rotational symmetry ... En savoir plus

A growing demand is recently emerging of sensors to be integrated in the concrete in order to measure some critical parameters, such as humidity and temperature and the internal pressure of the material. For example, by monitoring the pressure in various strategic points of the structure ... En savoir plus

In this paper, the effect of a crack to the flow-induced vibration characteristics of supported pipes is investigated based on vibration method. In order to estimate the crack location and depth in the pipe, we need to utilize the variation of the difference between the natural ... En savoir plus

This paper will present a numerical model based on COMSOL Multiphysics suited to simulate the dynamic response of a catenary mooring (or a submarine cable). In general, mooring lines are subject to a direct wave load (e.g. drag, inertia) in addition to the movement of the vessel to ... En savoir plus

This elaboration presents the Active Magnetic Suspension (AMS) and radial Active Magnetic Bearing (AMB) as a representative of the Active Magnetic Levitation Systems (AMLS). The laboratory test rigs are analyzed in the 2D space. The control algorithm as well as the motion dynamics are ... En savoir plus