Articles techniques et présentations

Corrosion marks were found in specific areas on the outer wall of a process container. The container is cooled by a spiral cooling jacket. The corrosion marks were found in the lower and upper circumference of the container and also in the areas adjacent to the water inlet and outlet. ... En savoir plus

Helicon Injected Inertial Plasma Electrostatic Rocket (HIIPER) [1] is an advanced space propulsion system being studied in University of Illinois Urbana-Champaign. It has been depicted in Figure 1. An experimental setup is already being used to gather dynamics of plasma with the help of ... En savoir plus

Dielectrophoresis (DEP) is an electric field driven technique that has important applications in the enrichment, concentration and isolation of biological and non-biological particles. The assessment of particle trapping capacity using DEP, however, has been qualitative in nature; since ... En savoir plus

An external magnetic field imposed on a ferrofluid with a temperature gradient, results in a non-uniform magnetic body force, which leads to a form of heat transfer called thermomagnetic convection. A magnet placed near the device will always attract the colder ferrofluid more than ... En savoir plus

An Acoustic Vector Sensor (AVS) is a compact device used for finding azimuthal as well as elevation angle of an acoustic source using particle velocity and pressure measured at the acoustic center of the device. There are mainly two types of AVS; namely P-P and P-U based AVS. P-P based ... En savoir plus

In this work we report a numerical model of a Rotating Disk Electrode (RDE) voltammetry in a finite size domain. Thus, explaining the discrepancy of the diffusion coefficient obtained from the experimental rotating speed, with respect to the literature data. We achieved a very good ... En savoir plus

This study investigates the effect of uniform magnetic field on the deformation of a ferrofluid droplet in a two dimensional (2D) simple shear flow by means of numerical simulation. The magnetic field is applied in a perpendicular direction to the flow direction. A numerical scheme ... En savoir plus

A numerical analysis on transient three-dimensional temperature distribution in a semi-infinite solid, irradiated by a moving Gaussian laser beam, is carried out numerically by means of the code COMSOL Multiphysics. The investigated workpiece is simply a solid. A laser source is ... En savoir plus

In this work we investigate a wet-chemical silicon etching process. COMSOL Multiphysics® is used to extract local pressure values to correlate them to experimental results. The test setup consists of a box with a fixed wafer and a nozzle that injects an etchant jet onto the wafer ... En savoir plus

Additive manufacturing is attracting more and more interest. Laser Cladding is one of these additive manufacturing processes. For this a quasi-stationary physical based 3D process model is presented, which has been developed taking into account heat transfer, melt pool fluid flow ... En savoir plus