Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Ici vous trouverez les présentations issues des Conférences COMSOL à travers le monde. Réalisées par des utilisateurs de COMSOL Multiphysics, ces présentations explorent tous les domaines actuels d'innovation. Les applications couvrent pratiquement tous les secteurs industriels et impliquent des phénomènes électriques, mécaniques, fluidiques et chimiques. Utilisez la recherche rapide pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

激光增材制造中的热质输运

李志永 [1],
[1] 中科院力学所

钴基高温合金，因其优异的高温综合性能而被广泛应用于航空发动机制造等领域，激光增材制造是制造几何形状复杂的高温合金零件的有效途径。目前，高温合金增材制造中，缺陷与组织成分的控制是关键的技术瓶颈，而这两方面的问题都与熔池中的热质传输过程密切相关，因此我们将研究的方向着眼于揭示熔池流动背后复杂的物理现象。本研究基于 COMSOL 多物理场耦合，应用 ht、tpfmm、tcs 接口，提出了适用于高温合金多组分热质传输的数值模型，研究了温度梯度G以及凝固速率R对界面围观凝固组织的影响以及钴基合金中主要成分 Fe、C、Co、Cr 的传质特性以及成分分布 ... En savoir plus

Glass Transition of ABS in 3D Printing

M. Rahman [1], N. R. Schott [2], L. K. Sadhu [3],
[1] North South University, Dhaka, Bangladesh
[2] Department of Plastics Engineering, University of Massachusetts - Lowell, Lowell, MA, USA
[3] IRays Teknology Ltd., Dhaka, Bangladesh

In a commercial 3D printer head, plastic ribbon passes through a hot nozzle of an extruder to dispense liquid plastic droplets to construct the model. In this paper a 2D axisymmetric model of a 3D head is considered to study the secondary transition change from below the glass ... En savoir plus

Electron Beam Crystallization of Amorphous Silicon Thin Films

S. Saager [1],
[1] Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology (FEP), Dresden, Germany

A promising method for low cost production of efficient silicon thin film solar cells is the electron beam physical vapor deposition (EB-PVD) of high purity amorphous silicon (a-Si) layers with high deposition rates up to 300 nm/s [1] followed by crystallization. This study focuses on EB ... En savoir plus

Electric Field Distributions and Energy Transfer in Waveguide-Based Axial-Type Microwave Plasma Source

H. Nowakowska[1], M. Jasínski[1], and J. Mizeraczyk[1,2]
[1]The Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdansk, Poland
[2]Dept. of Marine Electronics, Gdynia Maritime University, Gdynia, Poland

In this paper, we examine changes of the electric field distributions in waveguide-based axial-type microwave plasma source (MPS) during tuning procedure. The distributions strongly depend on position of the movable short, so does the wave reflection coefficient of the incident wave. A ... En savoir plus

Design and Characterization of MOEMS Optical Tweezers

J. A. Andrews[1], R. Chaubey[1], G. Dwivedi[1], V. Dwivedi[1], N. Sagar[1]
[1]National MEMS Design Center, Department of Applied Physics, Shri G S Institute of Technology & Science, Indore, Madhya Pradesh, India

Optical tweezers work on the idea of non-contact Optical Pressure felt by transparent particles, when shined by coherent light source such as lasers. On the other hand when light falls on the metal it excites the electron inside it and make them free. When these free electron cloud ... En savoir plus

Using High Pressure Chemical Vapor Deposition to Make Multimaterial Optical Fibers

S. Chaudhuri [1], J. V. Badding [1],
[1] Pennsylvania State University, University Park, PA, USA

Ever since its advent optical fibers have revolutionized the communication technology but apart from communication they are being used in a variety of other areas such as medical technology, sensing, laser sources in the form of fiber lasers, amplifiers, cutting and drilling, defense ... En savoir plus

Modelling of the Dynamical Fluorescent Micro-Thermal Imaging Experiment on the Heat Diffusion in the La5Ca9Cu24O41 Spin Ladder Compound

E. Khadikova[1], F. de Haan[1], P. H. M. van Loosdrecht[2]
[1]Zernike Institute for Advanced Materials, University of Groningen, Groningen, The Netherlands
[2]Department of Physics, University of Cologne, Köln, Germany

The dynamical fluorescent micro-thermal imaging (FMI) experiment has been used to investigate the phonon-magnon interaction in the 1D Heisenberg antiferromagnet La5Ca9Cu24O41. This material shows highly anisotropic heat conductivity due to the efficient magnetic heat transport along the ... En savoir plus

Validation of a CFD Study of Particle Distribution in Nuclear Workplace

P. Geraldini [1],
[1] Sogin S. p. A., Rome, Italy

Understanding the air flow patterns and aerosol trajectories in ventilated rooms can provide key information for determining where to place early warning and monitoring instruments, and how to minimize hazardous materials in the worker’s breathing zone. The dispersion within rooms can be ... En savoir plus

CMUT Based Free Membrane Intra-Cardiac Volumetric Blood Flow-Meter

P. Priya [1], B. D. Pant [2],
[1] Birla Institute of Technology and Science Pilani, Pilani, Rajasthan, India
[2] CSIR-Central Electronics Engineering Research Institute, Pilani, Rajasthan, India

In this paper, a free membrane is used as a receiver to increase the capacitance and therefore the resolution of the flow meter. For the current application, from the wavelength of sound wave in soft tissue (c= 1540 m/s) the resolution was calculated to be 0.48 mm. This gives the first ... En savoir plus

Drag Fluctuations of a Fully Deployed Flow Actuator Embedded Inside Turbulent Boundary Layer Flow

Dr. A. Elzawawy[1]
[1]Engineering & Technology Department, Vaughn College of Aeronautics & Technology, Flushing, NY, USA

Introduction: In this work, a CFD model of 2D flow around a fully deployed flow actuator was developed using COMSOL Multiphysics® software and the CFD Module. The results of COMSOL modeling is also compared with the experimental data of the same dimensions actuator. The 100mmX2mm ... En savoir plus

Premier

331–340 of 507

Dernier