- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Simulation of laser processes are more and more efficient. In some cases, as welding and additive manufacturing, the physical phenomena are complex, multi-physics and multi-phases, thus some assumptions have to be done. For Laser Powder Bed Fusion, a laser beam melts and vaporizes the ... En savoir plus
The thermal load on the system components is one of the technical problems in the development of microfocus X-ray tubes. To improve their stability in long-term use, it is important to understand the physical phenomena and their influence on the system stability and filament lifetime. To ... En savoir plus
Baking is a central production step in the industrial production of edible wafers and waffles. The initially liquid batter is heated with a pair of metallic baking plates. Establishing a uniform and accurate temperature at the baking face (inner baking plate surface) is crucial for ... En savoir plus
In regular biosensors, the detected bacteria have to be in drawn towards the sensing area. To increase the sensitivity of the biosensors, bacteria should be drawn towards the sensing area, which can be achieved by dielectrophoresis (DEP). DEP is a mechanism which is used to move ... En savoir plus
Continuous Ink Jet (CIJ) printing technologies are widely used in the field of industrial coding and marking. These technologies are based on the emission of a high-speed jet of ink droplets (20 m/s) onto the surface of a moving medium. To maintain sufficient print quality, it is ... En savoir plus
Overview We successfully simulated a template iontronic system for closed-loop neuromodulation and neurosensing. The model’s goal is to support the careful design of novel platforms for in-vitro micro-electrode-array sensors coupled to conductive polymer-based (CP) ionic actuators used ... En savoir plus
Metasurface (MTS) antennas are based on the use of special types of scattering surfaces patterned at a sub-wavelength scale with electrically small metallic dielectric inclusions, usually called unit cells [O. Quevedo-Teruel et al., Journal of Optics, vol. 21, 2019]. The radiation ... En savoir plus
The wide bandgap semiconductor silicon carbide (SiC) has drawn increasing attention in recent years as a promising material for high-power, high-frequency, and high-temperature operating devices. These outstanding properties of SiC make it a good candidate to replace silicon in many ... En savoir plus
Plasma, a complex fluid consisting of electrons, ions, neutrals, and excited species, exhibits both fluid-like behavior and electrical conductivity due to the presence of charge carriers. Consequently, computational modeling of plasma requires the integration of fluid and electrical ... En savoir plus
In the framework of the EURAMET project 16NRM05, a novel ionization gauge was developed. The goal was to develop a more stable ionization gauge that could be suitable for standardization. The AC/DC Module and the Particle Tracing Module in COMSOL® have been used to design and model the ... En savoir plus