Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Optimal Placement of Piezoelectric Plates to Control Multimode Vibrations of Rotating Beam

F. Botta[1], D. Dini[2], S. Gentili[1], G. Cerri[1]
[1]Dipartimento di Ingegneria Meccanica e Industriale, Università degli Studi di Roma Tre, Roma, Italy
[2]Department of Mechanical Engineering, Imperial College London, London, United Kingdom

Turbomachines blades are forced by a load resulting from the interaction with the fluid. The consequent vibrations, and the associated fatigue phenomena, can give catastrophic failures and the reduction of the blades life. It could be increased if damping system are used. The ... En savoir plus

An Integrated Numerical-Experimental Approach for Heat Transfer Analysis of Industrial Furnaces

G. Petrone[1], A. Adorisio[2], S. Adorisio[2], M. Calderisi[3], A. Cecchi[3], M. Scionti[1], F. Turchi[3]
[1]BE CAE & Test, Catania, Italy
[2]Gadda Industrie, Ivrea, Italy
[3]Laboratori Archa, Pisa, Italy

This paper deals with an integrated numerical and experimental analysis work aiming at the investigation of the thermal distribution inside an industrial furnace built for metal materials treatments. The main goal of the research is to find the geometrical and/or functional parameters ... En savoir plus

High Frequency Electromagnetic Device Modeling with COMSOL: Simulation vs. Experiment

P. Alotto[1], F. Dughiero[1], F. Bressan[1], M. Bullo[1]
[1]Università di Padova, Dipartimento di Ingegneria Industriale, Padova, Italy

Computer simulation is mandatory for the optimization of electromagnetic devices. Here we concentrate on two classes of devices operating in the MHz and GHz range, namely microwave ovens and TEM cells for electromagnetic compatibility testing. In particular we concentrate on the issue ... En savoir plus

Pore-Scale Simulation of Two-Phase Flow with Heat Transfer Through Dual-Permeability Porous Medium

H.A. Akhlaghi Amiri[1], A.A. Hamouda[1]
[1]University of Stavanger, Stavanger, Rogaland, Norway

This paper addresses one of the major challenges in water-flooded oil reservoirs, which is early water breakthrough due to the presence of high permeable layers in the media. COMSOL Multiphysics is used to model two phase (water and oil) flow in dual-permeability porous medium at micro ... En savoir plus

Implementation of an Isotropic Elastic-Viscoplastic Model for Soft Soils Using COMSOL Multiphysics

M. Olsson[1], T. Wood[1], C. Alén[1]
[1]Division of GeoEngineering, Chalmers University of Technology, Gothenburg, Sweden

In this paper a elastic-viscoplastic (creep) model is implemented in COMSOL 4.2a and 4.3 and benchmarked against another commercial finite element software package with a very similar material model. It is also validated against commonly performed laboratory tests such as Constant Rate ... En savoir plus

Modeling the Temperature-Dependent Dynamic Behavior of a Timber Bridge with Asphalt Pavement

B. Weber[1]
[1]Empa, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland

The fundamental frequency and the corresponding damping value are the main design parameters for footbridges against excessive vibrations induced by pedestrians. Since pedestrians typically walk at a pace of 1.6–2.4 Hz, this frequency range as well as the range of the second harmonic, ... En savoir plus

Seasonal Thermal Performance of Geothermal Piles

D. Testi[1], P. Conti[1]
[1]University of Pisa, Department of Energy and Systems Engineering, Pisa, Italy

The use of foundation piles as ground heat exchangers coupled to a geothermal heat pump is considered of interest for possible savings in installation costs, compared to conventional borehole heat exchangers. We refer to them as “geothermal piles” or “energy piles”. The main purpose of ... En savoir plus

Solar Cell Cooling and Heat Recovery in a Concentrated Photovoltaic System

M. Cozzini[1]
[1]Fondazione Bruno Kessler (FBK), Renewable Energies and Environmental Technologies (REET) Unit, Trento, Italy

Concentrated photovoltaic systems with high efficiency solar cells are being widely investigated, aiming at improving the cost-efficiency balance in the solar energy field. Different cell types are in use: e.g., high concentration triple junction cells, reaching efficiencies of the order ... En savoir plus

Modeling, Simulation, and Control of Dual Electromagnet Active Magnetic Levitation

A.K. Pi?at[1]
[1]AGH University of Science and Technology, Kraków, Poland

Introduction: The dual electromagnet configuration of Active Magnetic Levitation system (AML) where the electromagnets are locate opposite to each other, constitutes and single axis of the Active Magnetic Bearing. The same configuration can be used to test the single electromagnet AML ... En savoir plus

Elasto-Plastic FEM Models Explain the Emplacement of Shallow Magma Intrusions in Volcanic Complexes

A. Bistacchi[1]
[1]Università degli Studi di Milano Bicocca, Milano, Italy

We present numerical models and field data that aid understanding of volcano-tectonic processes related to the propagation of inclined sheets and dykes under a stress field resulting from the inflation of a shallow magma chamber. Structural field data from the classical Cuillins cone ... En savoir plus

Premier

3601–3610 of 6238

Dernier