Articles techniques et présentations

The study of multiphase flows inside the microfluidic devices has received much attention recently because of its applications in heat and mass transfer, mixing, microreaction, emulsification and most importantly in MEMS and lab-on-a-chip. We study the influence of an electric field on ... En savoir plus

Zinc Oxide (ZnO) was chosen as the piezoelectric material. A multi – d31 mode cantilever design was used, with varying dimensions of cantilever, to form an array. The individual cantilevers can be either connected in series or in parallel to achieve different output characteristics. ... En savoir plus

Dilution’s issue during dry machining have raised the interest’s environmental researchers and engineers. In fact, the sampling of dust emitted during dry machining was a serious problem for air quality evaluation at the workplace. Furthermore, the best sampling of fine and ultrafine ... En savoir plus

Electromagnetic actuators are representing one important component of ABB's medium voltage reclosers [1, 2]. Their performance is strongly influenced by the considered material properties as well as by the electronic control units that will power the actuator. Depending on the studied ... En savoir plus

We have developed Thor: a pulsed power accelerator for performing dynamic material experiments. The design was aided by using the COMSOL Multiphysics® software with the AC/DC Module and RF Module. Our design process involved optimizing the impedance of the system while maintaining a good ... En savoir plus

In high-speed digital design, strong electromagnetic coupling exists between adjacent transmission lines. This manifests itself in the form of crosstalk voltage induced on either line. Crosstalk is modeled in terms of capacitance and inductance matrices which are extracted using COMSOL ... En savoir plus

Arcam AB has pioneered additive manufacturing using the electron beam melting (EBM) technology which provides a cost efficient and novel way of producing titanium components for the orthopedic and aerospace industries. In the heart of the EBM technology is the electron beam – whose ... En savoir plus

High power Lower-Hybrid RF waves injected at in a Tokamak plasma can strongly modify the edge plasma. This is caused by ponderomotive forces pushing charged particles in an inhomogeneous oscillating electromagnetic field towards weaker field areas. On the Alcator C-Mod Tokamak, edge ... En savoir plus

Conventional passive microfluidic flow-focusing devices confront difficulties in controlling droplet sizes in dripping regime especially when the dispersed phase has a large viscosity. It is reported that external electric field can be used to manipulate the droplet breakup. In the ... En savoir plus

Porous Silicon (PS) can easily be formed by electrochemical etching of silicon in HF based electrolytes at room temperature. Since, PS is compatible with silicon IC technology; it finds lot of applications in the fabrication of MEMS devices. In the current study, we discuss the design of ... En savoir plus