Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Modelling of Micro/Macro Densification Phenomena of Cu Powder during Capacitor Discharge Sintering

G. Maizza[1] and A. Tassinari[1]

[1]Dipartimento di Scienza dei Materiali ed Ingegneria Chimica, Politecnico di Torino, Torino, Italy

Capacitor Discharge Sintering (CDS) is an ultrafast Electric Current Assisted Sintering method (u-ECAS) suited for electrically conductive powders. It is characterized by relatively short processing times (milliseconds range) and much lower sintering temperatures than the melting point ... En savoir plus

Blistering of Industrial Floor on Concrete Substrate: the Role of the Air Overpressure

S.V. Aher[2], P. Devillers[1], G. Fau[3], B. Tranain[3], and C. Buisson[1]
[1]Centre des Matériaux de Grande Diffusion, Ecole des Mines d’Alès, Alès cedex, France
[2]Indian Institute of Technology Kanpur, Kalyanpur, Kanpur, Uttar Pradesh, India
[3]Centre Scientifique et Technique du Bâtiment, France

Surface coating can fullfil their function satisfactorily over an extended period of time only if there is a good bond between the concrete substrate and the coating. The most numerous cases of blistering affect the airtight covers of the concrete subjected to negative pressures of ... En savoir plus

Blistering of Industrial Floors on Concrete Substrate: The Role of Air Overpressure

P. Devillers[1], S.V. Aher[2], G. Fau[3], B. Tranain[3], and C. Buisson[1]
[1]Centre des Matériaux de Grande Diffusion, Ecole des Mines d’Alès, France
[2]Department of Civil Engineering, Indian Institute of Technology Kanpur, Kanpur, Uttar Pradesh, India
[3]Centre Scientifique et Technique du Bâtiment, Champs sur Marne, France

A three dimensional COMSOL Multiphysics, transient analysis, diffusion model has been adopted to model the transfers of water in the industrial concrete floors. To take into account the different initial saturation levels at the different levels of the slab, the model is divided into ... En savoir plus

Modeling the Behavior of a Polymer Electrolyte Membrane within a Fuel Cell Using COMSOL

S. Beharry[1]
[1]University of the West Indies, St. Augustine, Trinidad and Tobago

One viable alternative to non-renewable fossil fuels is the fuel cell. A special class of FC i.e. Proton Exchange Membrane Fuel Cell (PEMFC) has been investigated during the present study. Membrane is a very important part of a PEMFC as most ohmic losses occurs here and limits the ... En savoir plus

Numerical Study of a DC Electromagnetic Liquid Metal Pump: Limits of the Model

N. Kandev[1]
[1]Institut de recherche d'Hydro-Québec, Shawinigan, QC, Canada

This work presents the results of a 3D numerical magneto-hydrodynamic (MHD) simulation of an electromagnetic DC pump for liquid metal using a rectangular metal flow channel subjected to an externally imposed transversal inhomogeneous magnetic field. In this study. 3D numerical simulation ... En savoir plus

Calculations of the FMR Spectrum in 1D Magnonic Crystals

M. Mruczkiewicz[1], M. Krawczyk[1], V.K. Sakharov[2], Yu. V. Khivintsev[2], Yu. A. Filimonov[2], S. A. Nikitov[3]
[1]Nanomaterials Physics Division, Faculty of Physics, Adam Mickiewicz University, Pozna?, Poland
[2]Kotel’nikov Institute of Radio Engineering and Electronics, Russian Academy of Sciences (Saratov Branch), Saratov, Russia; Laboratory “Metamaterials”, Chernyshevsky Saratov State University, Saratov, Russia
[3]Kotel’nikov Institute of Radio Engineering and Electronics, Russian Academy of Sciences, Moscow, Russia; Laboratory “Metamaterials”, Chernyshevsky Saratov State University, Saratov, Russia

FMR spectra of the periodic microstructures (one-dimensional magnonic crystals, 1D MCs) were obtained using COMSOL with use partial differential equation interface. Results of these calculations were successfully compared with an experimental data for Damon-Eshbach (DE) and Backward ... En savoir plus

Energy Transformation Damping

G.S. Mulder[1]
[1]Leiden, The Netherlands

A model for material damping is presented in terms of internal friction and in terms of a variation of stiffness. In the latter case the idea is that the stiffness increases if elastic energy is stored and decreases if elastic energy is released. In case of a single mass spring system ... En savoir plus

Numerical and Experimental Study of a Concentrated Indentation Force on Polymer Matrix Composites

V. Antonucci[1][2], M. Esposito[1], R. Marzella[2], and M. Giordano[1][2]
[1]Institute for Composite and Biomedical Materials, CNR, Portici, NA, Italy
[2]Imast, Portici, NA, Italy

A quasi static indentation test on a laminate composite has been investigated numerically and experimentally. In particular, the test has been implemented by COMSOL Multiphysics® and optimizing the Finite Element and mesh. In addition, the numerical strain results have been validated by ... En savoir plus

Multiphysics Modeling of Cellular Arrays Using Periodic Minimal Surfaces – A Drug and Gene Delivery Application

J.I. Rey, A.J. Llewellyn, R.J. Connolly, J.P. Jimenez, A.M. Hoff, and R.A. Gilbert
University of South Florida, Tampa, FL, USA

Minimal surfaces are found in nature from crystalline structures to biological nano and micro structures such as biomembranes, and osseous formations in sea urchin. An application to electrically mediated drug and gene delivery is presented. Periodic level surfaces which approximate ... En savoir plus

Exploiting New Features of COMSOL Version 4 on Conjugate Heat Transfer Problems

J.D. Freels[1], I.T. Bodey[2], and R.V. Arimilli[2]
[1]Oak Ridge National Laboratory, Oak Ridge, TN, USA
[2]University of Tennessee, Knoxville, TN, USA

Recent new releases of COMSOL provide the user with a dramatic new interface from which to interact, and many new features “under the hood” for solving problems more efficiently and with even greater accuracy and consistency than before. This paper will explore several of these new ... En savoir plus

Premier

371–380 of 457

Dernier