- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Induction heating (IH) [1] is a good candidate for decarbonization of chemical processes: energy savings, process intensification and production costs reduction [2-5]. Heat can be generated directly into the reactor at the surface in contact with the gas flux passing through a specific ... En savoir plus
Accurate magnetic field simulations are crucial in the design and optimization of advanced electromagnetic systems of the multi-beam mask writers (MBMWs). In MBMW systems, thousands of electron beams are focused with nanoscale precision within a small region close to the axis [μm], while ... En savoir plus
Our customer LeydenJar Technologies creates the world’s most energy dense battery anodes, enabling Li-ion batteries that are powerful, small and fast charging. Prime examples of applications include electronic devices and e-mobility. The anodes are made of silicon, and are produced with ... En savoir plus
This study presents a numerical investigation of optical butt-coupling between Vertical-Cavity Surface-Emitting Lasers (VCSELs) operating at 850 nm and Standard Single-Mode Fiber (SSMF), a widely adopted configuration in cost-effective, high-speed optical interconnects, especially in ... En savoir plus
Laser-induced photovoltage in ferromagnetic thin films is often explained by magneto-thermoelectric effects such as the anomalous Nernst effect (ANE). ANE appears when thermal gradients interact with magnetization. While power loss in flat films can be estimated analytically, numerical ... En savoir plus
The AC losses that superconducting magnet systems experience during transient events are an important design consideration in fusion reactors. We present results on the approach for calculating AC losses in the high temperature superconducting (HTS) toroidal field (TF) magnets of the ... En savoir plus
Binary meta-optical structures offer many new possibilities in the efficient manufacturing of products like diffractive beam splitters, phase correction elements, gratings and many more. At JENOPTIK we manufacture a variety of optical elements, based on electron beam lithography (EBL) ... En savoir plus
Balises are an essential part of pointwise train control systems ensuring the operational safety. Combined with a corresponding onboard unit, it represents an inductive transponder system (Fig. 1). During a crossing, the balise is activated by the 27 MHz magnetic field of the vehicle ... En savoir plus
This case study explains the work we undertook where we modelled an Induction heating system in COMSOL Multiphysics simulation software to correlate the simulation results with actual measurements. The simulated results were cross checked with several different measurement scenarios, ... En savoir plus
Background: Magnetic Induction Tomography (MIT) is an electromagnetic imaging technique that maps a material's electrical conductivity by inducing eddy currents via a primary oscillating magnetic field. The resulting secondary magnetic fields from the eddy currents are measured for image ... En savoir plus