Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Partial Discharge Risk Under Charge Generation and Transport Effects

M. E. Banda [1], D. Malec [1], J-P. Cambronne [1],
[1] LAPLACE, Université de Toulouse, CNRS, INPT, UPS, France

The good electrical, thermal, mechanical and chemical properties of solid organic dielectrics, such as PTFE, predestine them as good candidates for the electrical insulation of transport devices and systems. In the particular case of power converters involved in the future hybrid and ... En savoir plus

Simulating Organogenesis in COMSOL Multiphysics®: Tissue Mechanics during Organ Growth

M. Peters [1], D. Iber [1],
[1] D-BSSE, ETH, Zurich, Switzerland

During growth, tissue expands and deforms. Given its elastic properties, stresses emerge in an expanding and deforming tissue. Cell rearrangements can dissipate these stresses and numerous experiments confirm the viscoelastic properties of tissues. On long time scales, as characteristic ... En savoir plus

Modeling the Hyperloop with COMSOL®: on the Aerodynamics Design of the EPFLoop Capsule

N. Riva [1], L. Benedetti [1], Z. Sajó [1],
[1] EPFL - EPFLoop, Lausanne, Switzerland

The Hyperloop is a concept system targeting passenger transportation aiming to carry people in a pod running in a high vacuum tube at 1200 km/h. In 2015, SpaceX announced that they would sponsor a Hyperloop pod design competition, because of their interest in helping to accelerate the ... En savoir plus

Simulation of C-MEMS Based Enzymatic Biofuel Cell

Y. Parikh, V. Penmatsa, J. Yang, and C. Wang

Department of Mechanical & Material Science Engineering, Florida International University, Miami, FL, USA

An Enzymatic Biofuel Cell (EBFC) converts the chemical energy in biological fuels into electricity. In this work, we optimize the performance of the Carbon-Micro Electro Mechanical system in an EBFC by using COMSOL Multiphysics. With a simple model, we realized that most of the glucose ... En savoir plus

搅拌槽内层流高效混合的数值模拟

刘海龙 [1], 曹宇 [2], 王建成 [1], 刘志伟 [1],
[1] 中国，江苏省，镇江市，江苏大学
[2] 江苏大学、镇江市、江苏省、中国

摘要：机械搅拌作为一种重要的混合技术在化工生产、环保安全、生物制药等领域有着广泛的应用。搅拌效率和流场的分布是衡量搅拌质量的重要指标。然而，在层流搅拌流场中，搅拌桨周期性的扰动产生环形动力流场，搅拌槽内普遍存在混合隔离区，成为实现高效混合的主要障碍。合理的设计搅拌反应器强化流体流动与混合行为，是实现流体高效节能的重要手段。本研究基于有限元方法采用COMSOL-Multiphysics®分析平台的搅拌器模块中的层流接口进行模拟计算，参照搅拌器模块“案列库”中的“模块化搅拌器”边界条件，采用滑动网格技术求解 Navier-Stokes 方程模拟中低雷诺数的瞬态搅拌流动 ... En savoir plus

Thermohydraulic Study of a Fixed Bed for the Core of a Nuclear Reactor

J. C. Almachi [1], J. A. Montenegro [1],
[1] Departamento de Formación Básica, Escuela Politécnica Nacional, Quito, Pichincha, Ecuador

The fixed beds have the advantage of large heat transfer area, for they are used in some designs of innovative nuclear reactors as the reactor FBNR. Inside of study of fixed beds is important to define the following parameters: flow minimum and velocity profile of cooling fluid, ... En savoir plus

Simulating an Adaptive, Liquid-Filled Membrane Lens with COMSOL Multiphysics® Software

V. S. Negi[1], H. Garg[1], B. Singh [2],
[1] Central Scientific Instruments Organisation, Chandigarh, India
[2] Chandigarh College of Engineering and Technology, Chandigarh, India

Adaptive optics control using liquid filled membrane lens is based on the principle of deflection of polymeric membrane. Controlled deflection in membrane leads to controlled focal length. This enhances the focus tuning ability of the system at the same time make optical system compact ... En savoir plus

Secondary Flow of Liquid-liquid Two-Phase Fluids in a Pipe Bend

M. Ayala [1], P. Santos [2], G. Hamester [2], O. Ayala [3],
[1] Department of Mechanical Engineering, Universidad de Oriente, Puerto La Cruz, Venezuela
[2] Brazil Scientific Mobility Program, CAPES, Brasilia DF, Brazil
[3] Department of Engineering Technology, Old Dominion University, Norfolk, VA, USA

As the flow passed through the pipe, and entered the bend, various vortical structures appear, meaning that there is a secondary flow emerging. Also while the flow is in the bend gravity forces affect distinctively its behavior as long as the centrifugal force is not greater. From this ... En savoir plus

Numerical Study of Thermal Evaporation Unit for Phase Change of Liquid Hydrogen Peroxide to Vapor

Z. Jildeh [1], [2], [3], C. Hollenbeck [1], P. Kirchner [1], T. Wagner [2], P.H. Wagner [3], M.J. Schöning [2]
[1] Imagine Engineering GmbH, 50126 Bergheim, Germany
[2] Institute of Nano- and Biotechnologies (INB), FH Aachen, Campus Jülich, 52428 Jülich, Germany
[3] Soft Matter and Biophysics, Catholic University Leuven, 3001 Leuven, Belgium

Hydrogen peroxide (H2O2) vapor is a preferred medium of sterilization in different fields of industry. Among the fact that it dissociates to oxygen and water (environmentally-friendly), H2O2 vapor possesses strong mircobicidal and sporicidal characteristics. As such, the use of H2O2 ... En savoir plus

Modeling Wear of Journal Bearings

P. Bergmann [1], F. Grün [1],
[1] Chair of Mechanical Engineering, Montanuniversität Leoben, Leoben, Austria

Wear in hydrodynamic journal bearings resulting from solid contact in the mixed friction regime becomes an increasingly prominent topic leading to the necessity of numerical wear evaluations. A numerical method tackling this topic based on Archard’s wear law is presented and applied on a ... En savoir plus

Premier

401–410 of 920

Dernier