Consultez les proceedings de la Conference COMSOL 2020
Parametric Model Of An Air-Core Measuring Transformer
Power grid voltages and currents may be distorted due to presence of harmonics. Measurements of such voltage with harmonics may be performed using newly developed instrument with a small air-core transformer based probe as the input unit. The probe must be shielded against unknown ... En savoir plus
Analysis Of Particle Trajectories For Magnetic Drug Targeting
The technique of magnetic drug targeting binds genetic material or drugs to superparamagnetic nanoparticles and accumulates them via an external magnetic field in a target region. However, it is still a challenge for this approach to succeed in areas with high flow rates, like the aorta ... En savoir plus
Modeling Of A Strongly Coupled Thermal, Hydraulic And Chemical Problem: Drying And Low-Temperature Pyrolysis Of Chromated Copper Arsenate (CCA)-Wood Waste Particles In A Moving Bed Reactor
Low temperature thermal carbonisation might be the ultimate solution to the growing disposal problem of CopperChromeArsenic-treated waste wood. This energy and material recuperating technology is currently in the process of upscaling to an industrial level. In the present study, a ... En savoir plus
Thermal FEM Simulation Of A Multilevel Lab On Chip Device For Genetic Analysis
In this work, time dependent thermal analyses, performed on the 3D FE model of a multilevel Lab on Chip (LOC) platform are executed in order to gain insight into the temperature distribution within the device. By means of the COMSOL Multiphysics CAD import module, an extremely close 3D ... En savoir plus
Impact of Velocity and Interfacial Tension on the Performance of Horizontal Wells in Gas Condensate Reservoirs
Drilling horizontal wells (HWs) has recently received renewed attentions with the increasing trend in exploitation of tight gas reservoirs. An accurate estimation of productivity of such systems using a numerical simulator is a challenging task, because its 3D simulation requires a fine ... En savoir plus
Numerical Study of a High Temperature Latent Heat Storage (200-300oC) Using Eutectic Nitrate Salt of Sodium Nitrate and Potassium Nitrate
In this study, a small scale direct solar thermal energy storage system with secondary reflector is designed and developed. The main advantage of thermal energy storage is that cooking can be carried out during the time when there is little or no sun shine. In addition, no heat transport ... En savoir plus
Optimal Design of Slit Resonators for Acoustic Normal Mode Control in Rectangular Rooms
The present article presents a method to redistribute the acoustic modes of a rectangular enclosure in the low frequency range using slit resonators. The objective of the present work is to compare different strategies of optimal design in order to determine the dimensions of the ... En savoir plus
Active Infrared Technique for Landmine Detection: Numerical and Experimental Results
Landmines are an open problem in many countries of the world. They cause injuriesand death and no technique proposed to date guarantees fast and 100% reliable detection alone. To this purpose, at the Humanitarian Demining Laboratory of “La Sapienza” University of Rome, several solutions ... En savoir plus
Application of Multiphysics in the Simulation of Metallurgical Processes
In the steelmaking processes, the stirring of the metal bath by argon (or nitrogen) injection is a widely used method to achieve chemical or thermal homogeneity. Computational fluid dynamics can be used as a very powerful tool to gain an insight into the mass transfer and heat transfer ... En savoir plus
A Methodology For The Simulation Of MEMS Spiral Inductances Used As Magnetic Sensors
In this paper, a methodology to simulate the electric behavior of spiral inductances is presented and discussed. All the methodology is built with the COMSOL software used with the Matlab scripting interface and then allows performing fully parameterized simulations. The program ... En savoir plus