- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Dehydrogenation of ethylbenzene with a magnetite catalyst has been performed with a fixed bed flow type reactor under microwave irradiation. Microwave heating showed a temperature gradient in the catalyst bed. We analyzed an electromagnetic field and heat transfer in the microwave cavity ... En savoir plus
One of the challenges associated with the wire-arc additive manufacture (WAAM) of metals is to provide adequate inert gas shielding, not only for the molten pool, but also for the long reactive metal surface that follows it. For Ti-6Al-4V, it has been shown that increased levels of ... En savoir plus
The coaxial magnetic gear is a good alternative to classic mechanical gears. The magnetic gear has high mechanical durability, overload protection and lower noise, than a mechanical gear [1,2]. A static model of a magnetic gear [3,4] is used for simulation of the magnetic fields and ... En savoir plus
近年来,一些研究人员基于金属波导的结构色散实现了各向同性的波导超材料,并研究了其各种各样的应用。然而,各向异性的波导超材料却没有得到深入的研究。我们利用金属平板/矩形波导在TEm模式下的结构色散,并在波导内部周期性交替填充两种不同的电介质A和B,并辅以细金属线连接上下金属板,从而可以将整个波导系统等效成二维TM偏振下的各向异性有效介质。我们发现在金属波导内沿着A-B多层介质的两个光轴方向存在两个不同的截止频率。当工作频率处在这两个截止频率范围内时,整个波导系统等效后的有效介质等频率曲线呈现出双曲函数的形式,即实现了双曲型波导超材料;当工作频率在较高的截止频率附近时 ... En savoir plus
Helicon Injected Inertial Plasma Electrostatic Rocket (HIIPER) [1] is a plasma thruster being researched at University of Illinois Urbana-Champaign. It has been shown in Figure 1. It involves a helicon source along with an Inertial Electrostatic Confinement (IEC) chamber. IEC is a fusion ... En savoir plus
This paper presents the study of the simulation of mixed-mode S-parameter using COMSOL Multiphysics® RF Module. In addition, a COMSOL® application is also developed for the study of electrical connectors. We are interested in modeling electrical connectors used for data transmission ... En savoir plus
Arc current welding is a widespread process in heavy industry for the assembly of metallic components. In order to ensure the good quality of assemblies welds, it is appropriate to master the welding process but also to have a deep understanding of interactions with the weld pool and ... En savoir plus
With the Release 14, the Third Generation Partnership Project (3GPP) [3GPP TR 38.913 V0.4.0, 2016] paved the way to the possibility of delivering digital television services on mobile terminals, such as smartphones and tablets, overcoming all the limitations which characterize the ... En savoir plus
In order to better understand the effect of controlled surface topographical features on SERS (surface-enhanced Raman scattering) enhancement factors, simulations of plasmonic properties of different gold surfaces (smooth, rough and nanostructured) have been carried out using the finite ... En savoir plus
This paper presents a three-dimensional fluid model for a low-power microwave-excited argon microstrip plasma source operated at 2.45 GHz. The gas pressures in the gas channel are 50 and 100 Torr and the input power is 2 W. Simulations are performed by the Plasma Module of COMSOL ... En savoir plus
