Consultez les proceedings de la Conference COMSOL 2024
COMSOL Multiphysics® software is used to model a water tree in tape shield and concentric neutral cables. It allows for the effect on electric field intensity at the tip of the water tree and electric potential due to the water tree to be better understood. Also, COMSOL is used to ... En savoir plus
The National Electrical Safety Code (NESC) requires that high voltage power lines in the U.S. be designed to limit electrostatic effects on nearby equipment. An example is that of a large vehicle underneath a transmission line. The tires insulate the vehicle’s body from ground. If a ... En savoir plus
A fuel cell is an efficient and clean alternative power source of energy. Alkaline anion exchange membrane (AAEM) fuel cells are one in which conduction of oH- (hydroxyl ion) take place. The advantages of using alkaline fuel cells over proton exchange membrane fuel cells is that ... En savoir plus
The shear mode of film bulk acoustic resonators (FBARs) is preferred to the longitudinal mode owing to its lower acoustic losses in a liquid. However in addition to mass loading, the resonance is also affected by temperature and liquid viscosity. These two parameters can either be sensed ... En savoir plus
This computational implementation presents a new strategy of coupling two 3D models to satisfy the requirements of the comprehensive model of a unitary Proton Exchange Membrane fuel cell, including its internal geometries and constitutive materials, as well as distinct physical and ... En savoir plus
The EM optimization of a coarsely discretized model of a microstrip band-pass filter implemented in COMSOL Multiphysics® was realized using two different model configurations. We presented a systematic methodology to find an appropriate 3D EM model configuration on a direct EM ... En savoir plus
This paper deals with the numerical experiments for early prediction of muffler performance at the design stage. In this experiment, a Reactive Muffler is developed and validated numerically compared to traditional built and test process. En savoir plus
One of the greatest challenges in developing algorithms for imaging from scattered fields is the lack of suitable scattered field data from known targets. It has proved quite difficult to acquire this data from measurements in the laboratory due the fact it can be costly, time ... En savoir plus
When it comes to study the behavior of the secondary batteries, physics-based models are more representative of the real behaviour than equivalent circuit models, especially for the estimation of the life and capacity fading. On the other hand, the complexity and computational cost of ... En savoir plus
The present work focuses on the use of piezoelectric materials as actuators for shape control of composite laminates such as Lead Zircronate Titanate (PZT), and other piezoelectric fiber composites such as Active fiber composites (AFCs), Microfiber Composites (MFCs) which allow for ... En savoir plus