Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Toutes

Boston 2025

Terme recherché:

laser

Numerical and Experimental Studies of a Capillary Channel

M. Xu[1], Z. Wu[1], X. Wang[1]
[1]Tsinghua University, Beijing, China

Capillary effects are common in microfluidics due to large surface-to-volume ratio of flows inside microchannels. In biological or chemical analysis, capillary flow is used for the transport of liquid and mixing enhancement, without applying any external means. It’s used in biochemical ... En savoir plus

Modeling Magnetic Induction from Transient Events Impinging upon a Conducting Moon

H. Fuqua[1], G. Delory[1], I. de Pater[2], R. Grimm[3]
[1]University of California - Berkeley, Space Sciences Lab, Berkeley, CA, USA
[2]University of California - Berkeley, Berkeley, CA, USA
[3]Southwest Research Institute, Boulder, CO, USA

Electromagnetic sounding measurements utilize magnetic induction to constrain the interior geophysical properties of planetary bodies. Under some conditions, the Earth’s moon can be approximated by the response of a conducting sphere in a vacuum. Transient magnetic fields originating ... En savoir plus

Simulation of Constant-Volume Droplet Generators for Parallelization Purposes

D. Conchouso [1], A. Arevalo [1], D. Castro [1], Y. Ying [1], I. G. Foulds [2]
[1] King Abdullah University of Science and Technology, Thuwal, Makkah, Saudi Arabia
[2] School of Engineering, University of British Columbia - Okanagan, Vancouver, BC, Canada

To maintain same droplet size across parallel devices, new break-up strategies based on geometry are been studied. In this work, we model a geometrically-set droplet generator, in which the droplet break-up occurs by a block and break mechanism. In other words when the disperse phase ... En savoir plus

Photon Migration Through Multiple Layers of Biological Tissue

M.S. Yeoman[1], E. Sultan[2]
[1]Continuum Blue, Tredomen, Ystrad Mynach, United Kingdom
[2]College of Technological Studies, PAAET, Adailiyah, Kuwait

The modeling of light propagation through multiple layers of biological tissue are assessed & compared to the theoretical predictions by Perelman at al. [94 & 95] of the most-favorable-path (MFP). The MFP on which photons will be found can be obtained from the path of the net ... En savoir plus

Hybrid Design Electrothermal Polymeric Microgripper with Integrated Force Sensor

V. Vidyaa[1]
[1]Jawahar Engineering College, Affliated to Anna University, Chennai, Tamil Nadu, India

Microgrippers are typical MEMS devices used to pick, hold and transport micro-objects. Microgrippers are widely used in the field of micro-assembly, micro-surgery and manipulation of micro-particles. Thermal microgrippers are widely used for large displacement, high accuracy and ... En savoir plus

Optimized Illumination Directions of Single-Photon Detectors Integrated with Different Plasmonic Structures

M. Csete[1], Á. Sipos[1], A. Szalai[1], G. Szabó[1]
[1]Department of Optics and Quantum Electronics, University of Szeged, Szeged, Hungary

The optimal orientations of different single-photon detector designs were determined by COMSOL software package. Absorption of niobium-nitride (NbN) stripes in two different (p=220 nm, 3p=660 nm) periodic patterns integrated with plasmonic elements was studied. In OC-SNSPDs consisting ... En savoir plus

FEM Simulations of Rod-Type Photonic Crystal Slabs as Resonant Microsystems for Optical Gas Sensors

C. Kraeh, and H. Hedler
Siemens AG, Munich
Munich, Germany

We are developing a solid state gas sensor that combines a small form factor with the high sensitivity of optical gas detection. The gas sensor is based on an optical resonant microsystem that is penetrated by gas molecules. This microsystem consists of an array of vertical rods in air ... En savoir plus

The Effects of the Contact Angle on the Dynamics of Water Droplet Impingement

J. Hu [1], X. Huang [2], X. Xiong [1], K. T. Wan [2],
[1] University of Bridgeport, Bridgeport, CT, USA
[2] Northeastern University, Boston, MA, USA

INTRODUCTION The dynamic behavior of droplet impingement on a solid surface is important to many engineering applications, such as rain drops on automobile windshields, inkjet deposition and metal deposition in manufacturing processes, spray cooling of electronics, and spray coating for ... En savoir plus

COMSOL Multiphysics® Software and PV: A Unified Platform for Numerical Simulation of Solar Cells and Modules

M. Nardone [1],
[1] Bowling Green State University, Bowling Green, OH, USA

Introduction: Existing solar cell (photovoltaic, PV) device simulation software is either open source with limited capabilities (1D only) [1,2] or extremely expensive with obscure functionality [3]. PV researchers need an accessible and versatile simulation tool to optimize existing ... En savoir plus

Estimation of Fluid Pressure in the Process of Magneto-rheological Flow Finishing

S. Chothe[1], P. Ranjan[1], Dr. P.M. Pawar[1], A.B. Shinde[1]
[1]SVERI's College of Engineering, Pandharpur, Maharashtra, India

This paper presents the 3D model of pressure distribution in the process of magneto-rheological flow finishing. The effect of working gap on pressure distribution is studied using COMSOL Multiphysics® software. Also, the effect of different viscosity of fluids on development of pressure ... En savoir plus

Premier

461–470 of 515

Dernier