- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
The subject of the interactions between electromagnetic (EM) fields and living cells is a strong issue for several decades [1]. Large number of works have been done to study the EM field penetration and inner induced currents in living microorganisms. Relevant information to be collected ... En savoir plus
Due to the increase on the academic and industrial interest on thermal energy storage (TES) systems, the EU Horizon project HYSTORE is developing 4 different solutions. In these solutions, the use of thermochemical materials (TCM) and phase-change materials (PCM) are proposed. We ... En savoir plus
This study demonstrates that a multiphysics model of a LiFePO4/Li half-cell can be applied to simulate the impedance results from an EIS. However, it implies that the double layer capacitance has to be taken into account, since it is responsible of the semi-circle in the impedance ... En savoir plus
Common mode chokes are used in electrical circuits to filter out the electromagnetic interference (EMI). The goal of this study is to simulate the impedance of the choke within a range of frequency from 0.01 MHz to 50 MHz. In this simulation model the COMSOL® AC/DC Module with magnetic ... En savoir plus
MEMS microphones have been widely adopted in a variety of consumer electronic systems. To ensure clear speech transmission and avoid degradation of important signals, careful tuning of microphone port geometry is essential to mitigate wind-induced airborne noise. This additional noise ... En savoir plus
To achieve a deeper understanding of the mechanism of the Deep Brain Stimulation (DBS) scientists use more and more numerical simulations. DBS inhibits overreaching brain activity via electric pulses that send into the brain by electrodes. Different electrode parameters such as geometry, ... En savoir plus
Synthetic jet actuators enhance flow control by generating pulsatile jets with zero net mass flux. There is a need to develop a computationally inexpensive model that can generate optimal geometric actuator designs of maximum jet performance. This work investigates the multi-physics ... En savoir plus
Metasurface (MTS) antennas are based on the use of special types of scattering surfaces patterned at a sub-wavelength scale with electrically small metallic dielectric inclusions, usually called unit cells [O. Quevedo-Teruel et al., Journal of Optics, vol. 21, 2019]. The radiation ... En savoir plus
A model of a cell counter sensor based on Impedance Spectroscopy (IS) has been implemented in COMSOL Multiphysics. The cell counter is a silicon-based microdevice consisting in 3D electrodes placed in a wide microchannel: cells flow in the microchannel through the electrodes to be ... En savoir plus
Proton exchange membrane fuel cells (PEMFCs) are promising energy converters, offering both sustainability and efficiency. Achieving optimal performance, however, requires a deep understanding of the underlying cause-effect relationships within the functional layers. One effective ... En savoir plus