Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Toutes

Boston 2025

Terme recherché:

"electromagnetic*"

Multiphysics Modelling of a Micro Valve

F. Bircher[1] and P. Marmet[1]

[1]Institute of Print Technology, Bern University of Applied Sciences, Burgdorf, Switzerland

Electromagnetic micro valves are currently developed empirically or the different physics are treated separately. To accelerate the development-process and for a better understanding of the overall system, a multiphysics simulation is built up. This simulation considers the ... En savoir plus

Topographic Effects on Radio Magnetotelluric Simulations on Levees: Numerical Modeling for Future Comparison With Fields Results

R. Duval[1], C. Fauchard[1], R. Antoine[1]
[1]ERA23-IFSTTAR, Laboratoire des Ponts et Chaussées de Rouen, CETE-Normandie Centre, France

We study the topography influence of levees on the electric resistivity signal obtained with the Radio-Magnetotelluric method. Field measurements have been modeled with COMSOL, using the AC/DC and RF Modules. A levee situated in Orléans along the Loire river (France) has been considered ... En savoir plus

FEM Based Design and Simulation Tool for MRI Birdcage Coils Including Eigenfrequency Analysis

N. Gurler[1], Y. Ziya Ider[1]
[1]Department of Electrical and Electronics Engineering, Bilkent University, Ankara, Turkey

Designing a Radio Frequency (RF) birdcage coil used in Magnetic Resonance Imaging (MRI) at high frequencies where the wavelength is comparable with the coil dimensions is a challenging task. Before construction of the coil, not only calculating the capacitance value which is necessary ... En savoir plus

Studying Target Erosion in Planar Sputtering Magnetrons Using a Discrete Model for Energetic Electrons

C. Feist[1], A. Plankensteiner[2], J. Winkler[2]
[1]CENUMERICS, Innsbruck, Austria
[2]PLANSEE SE, Reutte, Austria

A discrete model for the prediction of relative ion bombardment flux and target erosion in planar sputtering magnetrons is implemented in COMSOL Multiphysics®. Planar magnetrons are used within physical vapor deposition (PVD) processes to form thin film depositions on various types of ... En savoir plus

Thermal and Solid-Mechanics FEM Simulation of a Microwave Spatial Power Combiner Amplifier

A. Leggieri[1], F. Di Paolo[1], D. Passi[1]
[1]University of Rome "Tor Vergata" - Department of Electronic Engineering, Rome, Italy

This paper describes the thermal and structural combined simulation on COMSOL Multiphysics® of a Microwave (MW) Fin Taper (FT) Spatial Power Combiner (SPC) Power Amplifier (PA), based on rectangular Waveguide (WG). In the SPC based PA's, the captured power is feeded by microstrip ... En savoir plus

Fast Computation of Capacitance Matrix and Potential Distribution for Multiconductor in Non-Homogenous Multilayered Dielectric Media

S.M. Musa[1], and M.N.O. Sadiku[1]

[1]Prairie View A&M University Networking Academy, Prairie View, Texas, USA

This paper presents the fast computational and modeling of multiconductor transmission lines interconnect in non-homogenous multilayered dielectric media using the finite element method (FEM). We illustrate the potential distribution of the multiconductor transmission lines for the ... En savoir plus

基于变换光学算法的薄壁结构微波加热优化

朱铧丞¹, 杨丰铭 ¹
¹四川大学

在微波加热的多物理场仿真中，如果被加热物体的几何区域太小或者太薄，会造成整个模型网格剖分困难、网格数量多且计算消耗内存大等问题。本文针对微波加热时薄壁容器的网格剖分困难，网格数量大，且占用计算机内存资源多的问题，提出了一种基于变换光学算法的微波薄壁加热模型计算优化方法。利用变换光学算法将薄壁区域空间扩大，通过改变薄壁区域内的介质参数来与原模型进行空间映射，从而避免网格剖分过程中的薄壁问题出现，这样可以在同样的网格剖分设置下减少整个模型的网格数量，节省计算时间，减少计算机内存资源的占用。通过相应的公式推导，在二维模型中实现了薄壁变换光学算法的计算 ... En savoir plus

Design of an Electrodynamically Actuated Microvalve Using COMSOL Multiphysics® and MATLAB®

M. Williams, J. Zito, J. Agashe, A. Sopeju, and D. Arnold
University of Florida, Gainesville, USA

This paper describes the design of a normally closed, electrodynamic microvalve. Magnetic forces between a permanent magnet in the valve cover and a soft magnet in the valve seat hold the valve closed. The combination of electrodynamic actuation and a mechanical restoring spring are ... En savoir plus

Magnetic Stimulation of the Human Brain with Low-Intensity Field

D. Lazutkin[1], A. Harkara[2], and P. Husar[1]
[1]Ilmenau University of Technology, Ilmenau, Thuringia, Germany
[2]Simpleware Limited, Exeter, Devon, United Kingdom

The most popular means of depression treatment are psychotherapy, antidepressant medication and recently adopted transcranial magnetic stimulation (TMS) of the human brain. To overcome their disadvantages we are investigating an application of low-field magnetic stimulation (LFMS) to ... En savoir plus

MultiPhysics Analysis of Trapped Field in Multi-Layer YBCO Plates

P. Masson[1], and R. Meinke[1]
[1]Advanced Magnet Lab, Palm Bay, Florida, USA

Superconductors have the unique capability of trapping magnetic flux. This feature has the potential to enable and improve several applications including high power density rotating machines. Current material used as trapped flux magnets (TFM) is single domain YBCO that present numerous ... En savoir plus

Premier

511–520 of 1147

Dernier