Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Cryogenic Heat Sink for Helium Gas Cooled Superconducting Power Devices

L. Graber[1], N.G. Suttell[1], D. Shah[1], D.G. Crook[1], C.H. Kim[1], J. Ordonez[1], S. Pamidi[1]
[1]Center for Advanced Power Systems, Florida State University, Tallahassee, FL, USA

Heat sinks for cryogenic applications using helium gas as the coolant are not readily available. They require to be designed specifically for the intended application. A finite element model was developed to study the feasibility and optimize the design. The FEM computing package COMSOL ... En savoir plus

Property and Performance Prediction of Meta Composites for Novel Applications

C. Thiagarajan[1]
[1]ATOA Scientific Technologies Private Limited, Whitefield, Bangalore 560066, India.

Metacomposites are new class of materials with unusual properties that can be engineered using existing materials with usual properties. The unusual properties of metacomposites are derived from the structure, analogues to atomic arrangement in crystal lattice. These material exhibits ... En savoir plus

Optimizing Bio-Inspired Flow Channel Design on Bipolar Plates of PEM Fuel Cells

X. Wang[1], J. Peitzmeier [2], and S. Kapturowski[3]
[1]Oakland University, Rochester, MI, USA
[2]Michigan Technological University, Houghton, MI, USA
[3]The State University of New York at Buffalo, Buffalo, NY, USA

The flow channel design on bipolar plates affects proton exchange membrane (PEM) fuel cell performance by influencing reactant distribution and water removal in an operating fuel cell. The fuel cell performance can be improved by varying the type, size, or arrangement of channels. Two ... En savoir plus

Cavity Sprayer Flow Optimization for Medical Devices Industry

T. Selvam, V.P. Kotte, and M. Marimuthu

HCL Technologies Ltd, Chennai, Tamil Nadu, India

Globally in Otolaryngology industry, Sinusitis is one of the most common diseases related to the nose. Sinusitis is caused when the cilia fail to move the mucus. As a result sinus tissue gets infected that leads to blockage of the sinuses. All the sinusitis can not be cured through drugs ... En savoir plus

Simulating Frequency Nonlinearities in Quartz Resonators at High Temperature and Pressure

A. Beerwinkle[1], R. Singh[1], and G. Kirikera[2]
[1]Mechanics of Advanced Materials Laboratory, School of Mechanical and Aerospace Engineering, Oklahoma State University, Tulsa, OK
[2]Geophysical Research Company, LLC, (GRC) Tulsa, OK

A three-dimensional finite element model, based on the linear field equations for superimposed small vibrations onto nonlinear thermoelastic stressed media given by Lee and Yong, was developed. This method involves solving the thermal stress and piezoelectric model with geometric and ... En savoir plus

COMSOL Based Multiphysics Analysis Of Surface Roughness Effects On Capacitance In RF MEMS Varactors

D. Mondal[1], R. Mukherjee[2], D. Mukherjee[1], and C. RoyChaudhuri[1]
[1]Department of Electronics and Telecommunication Engineering, Bengal Engineering and Science University Shibpur, Howrah, West Bengal, India
[2]School of VLSI Technology, Bengal Engineering and Science University Shibpur, Howrah, West Bengal, India

In this paper, the effects of roughness in the surfaces of the plates caused due to nonuniform etching during their release and/or due to defects in the original wafer on the capacitance in RF-MEMS parallel plate varactors are analyzed. Capacitance extraction due to surface roughness has ... En savoir plus

Multiphysics Simulation of a Circular-Planar Anode-Supported Solid Oxide Fuel Cell

K. Daneshvar[1], A. Fantino[1], C. Cristiani[1], G. Dotelli[1], R. Pelosato[1], M. Santarelli[2]
[1]Politecnico di Milano, Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta”, Milano, Italy
[2]Politecnico di Torino, Dipartimento di Energetica, Torino, Italy

A 2D isothermal axisymmetric model of an anode-supported Solid Oxide Fuel Cell (SOFC) has been developed. Also a parametric analysis to find the effect of important parameters on the cell performance has been done. This simulation has been carried out at 1 atm and 1073 K. The PEN ... En savoir plus

Gravitational Collapse of Rectangular Granular Piles

M.H. Babaei[1], T. Dabros[2], S.B. Savage[3]
[1]Ocean, Coastal, and River Engineering, National Research Council of Canada, Ottawa, ON, Canada
[2]Natural Resources Canada, CanmetENERGY, Devon, AB, Canada
[3]Department of Civil Engineering & Applied Mechanics, McGill University, Montreal, QC, Canada

In this study, the dam-break type two-dimensional gravitational collapse of rectangular granular piles in air was numerically studied. The frictional behavior of the material was based on the von-Mises model with the Mohr-Coulomb yield surface leading to pressure and strain-rate ... En savoir plus

Thermal Simulations of a LED Light Using COMSOL Multiphysics

M. Maaspuro[1]
[1]University of Turku, Turku, FInland

An experimental LED light composed of a multi-chip LED-module, a LED driver and an efficient heat sink, was investigated using COMSOL Multiphysics software and the Heat Transfer Module. In an LED light heat is mainly generated in the LEDs but some amount of heat is generated also in the ... En savoir plus

Numerical Analysis of Propeller-induced Low-frequency Modulations in Underwater Electric Potential Signatures of Naval Vessels in the Context of Corrosion Protection Systems

D. Schaefer[1], J. Doose[2], A. Rennings[1], and D. Erni[1]
[1]General and Theoretical Electrical Engineering (ATE), Faculty of Engineering, University of Duisburg-Essen, Duisburg, Germany
[2]Technical Center for Ships and Naval Weapons (WTD 71), Bundeswehr, Eckernförde, Germany

Since October 2009 the laboratory of ATE has carried out collaborative research with the WTD 71 that aims for prediction, reduction and optimization of so-called underwater electric potential (UEP) signatures. COMSOL is used to simulate potential distributions in the context of impressed ... En savoir plus

Premier

581–590 of 646

Dernier