Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Comsol’s New Thermoviscous Interface and Computationally Efficient Alternative Formulations for FEM

W. R. Kampinga[1], and Y. H. Wijnant[2]
[1]Reden, Hengelo, Netherlands
[2]University of Twente, Enschede, Netherlands

Three efficient alternatives to the model in COMSOL’s thermoacoustics interface are presented. The higher efficiency of these models are explained from theory and are demonstrated by means of two examples. En savoir plus

Using a Level-Set Model to Estimate Dwell Time in a Vacuum Dewatering Process for Paper

K. Rezk[1]
[1]Department of Energy, Environmental and Building Technology, Karlstad University, Kronoparken, Sweden

Water removal during paper manufacturing is an intensive energy process. The dewatering process generally consists of four stages in which the first three stages, water is removed mechanically through vacuum pulses and pressing.The fourth stage involve thermal drying. The vacuum ... En savoir plus

Homogeneous and Inhomogeneous Model for Flow and Heat Transfer in Porous Materials as High Temperature Solar Air Receivers

O. Smirnova, T. Fend, P. Schwaryboezl, and D. Schoellgen
German Aerospace Center, Institute of Technical Thermodynamics, Koeln, Germany

Results of simulations on flow and heat transfer in a porous Silicon Carbide honeycomb structure applied as a solar air receiver are presented. In this application porous materials are put in concentrated solar radiation. Flux densities of up to 1000 MW/m² are reached. Simultanously, ... En savoir plus

Modeling of Transport Phenomena in Metal Foaming

B. Chinè[1], M. Monno[2]
[1]Laboratorio MUSP Piacenza, Italy; ITCR, Esc. Ciencia e Ing. Materiales, Cartago, Costa Rica
[2]Laboratorio MUSP, Piacenza, Italy; Politecnico di Milano, Dip. Meccanica, Milano, Italy

Metal foams are interesting materials with many potential applications in engineering. Foamed metals or alloys include gas voids in the material structure with the real possibility to modify ad hoc their physical properties. Following our previous efforts aimed to simulate and study the ... En savoir plus

Mathematical Model of Blood Flow in Carotid Bifurcation

E. Muraca[1], V. Gramigna[1], and G. Fragomeni[1]
[1]Department of Experimental Medicine and Clinic, Magna Graecia University of Catanzaro, Catanzaro, Italy

The goal of this research is to provide the medical staff with a numerical system assessment of wall shear stress in carotid bifurcation. Through this model, it will be fundamental to investigate the stress state properties of the surface in contact between the plaque and the artery, and ... En savoir plus

Finite Element Method Plasma Simulation of Nitrogen Contaminated Ceramic Metal Halide Lamps

P. Juhász[1], S. Beleznai[1], I. Maros[1]
[1]Budapest University of Technology and Economics, Budapest, Hungary

The ceramic metal halide lamps belong to the most efficient high intensity light sources of these days. Presently it is the nitrogen contamination that causes the most significant problems during ignition. If this material gets into the lamp's interior in high concentrations, it will ... En savoir plus

Modeling of Expanding Metal Foams

B. Chinè[1,2], M. Monno[3]
[1]Laboratorio MUSP, Macchine Utensili e Sistemi di Produzione, Piacenza, Italy
[2]School of Materials Science and Engineering, Costa Rica Institute of Technology, Cartago, Costa Rica
[3]Politecnico di Milano, Dipartimento di Meccanica, Milano, Italy

Metal foams are interesting materials with many potential applications. They are characterized by a cellular structure represented by a metal or metal alloy and gas voids inside (Fig.1). A common metallic cellular material is aluminum foam which can be produced metallurgically by heating ... En savoir plus

Modeling Transient Adsorption/Desorption Behavior in a Gas Phase Photocatalytic Fiber Reactor

S. Denys [1], J. Van Walsem [1],
[1] Sustainable Energy, Air & Water Technology, Department of Bioscience Engineering, University of Antwerp, Belgium

Integration or retrofitting of photocatalytic air purifying units into HVAC (Heating, Ventilation and Air Conditioning) equipment is an interesting approach for abating indoor air pollution and removal of volatile organic compounds. An attractive possibility is the use of glass fiber ... En savoir plus

Model of an Interdigitated Electrodes System for Cell Counting Based on Impedance Spectroscopy

E. Bianchi[1][2], F. Bellati[1], E. Rollo[2], G. Dubini[1], C. Guiducci[2]
[1]Politecnico di Milano, LaBS, Laboratory of Biological Structure Mechanics, Milano, Italy
[2]Swiss Federal Institute of Technology (EPFL), Laboratory of Life Sciences Electronics - Swiss Up Chair, Lausanne, Switzerland

A model of a cell counter sensor based on Impedance Spectroscopy (IS) has been implemented in COMSOL Multiphysics. The cell counter is a silicon-based microdevice consisting in 3D electrodes placed in a wide microchannel: cells flow in the microchannel through the electrodes to be ... En savoir plus

Computational Fluid Dynamics Simulations of an Innovative System of Wind Power Generation

S. Carcangiu, A. Fanni, and A. Montisci
Department of Electric and Electronic Engineering
University of Cagliari
Cagliari, Italy

In this work an innovative wind power generation in urban areas is proposed. The generation system substitutes the roof of the building and it consists of a static part, the stator, and a moving part, called impeller, which is a centripetal turbine with vertical axis of rotation. Since ... En savoir plus

Premier

591–600 of 931

Dernier