- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Dr. Ivar Kjelberg is Senior Project Manager for Mechatronics in the Systems Engineering Division of CSEM SA in Neuchâtel, Switzerland. He obtained the diploma as \"Ingénieur Physicien\" from the Ecole Polytechnique Fédéreale EPFL in Lausanne, Switzerland in 1979, and a PhD at the local ... En savoir plus
A novel combined photovoltaic-thermal panel can simultaneously increase the conversion efficiency of the PV cell and utilize some of the excess thermal energy created by the conversion process (see Figure 1). The Conjugate Heat Transfer physics in COMSOL was used to create a two ... En savoir plus
Multigrid methods (MG) belong to the fastest solvers for partial differential equations. The key for this is an appropriate composition of the algorithmic components [1,2,4]. The multigrid solver implemented in COMSOL Multiphysics® is analyzed with respect to components and with respect ... En savoir plus
VRALA is the ideal candidate as an Adaptive Optics actuator at visible wavelengths. Its electric characteristics variations, suitable current commands, and an effective magnetic circuit geometry provide a 2 kHz correction bandwidth and a 25 mm actuator density. The magnetic core allows ... En savoir plus
The research documented herein was funded by a research contract between the Research Reactors Division (RRD) of Oak Ridge National Laboratory (ORNL) and the University of Tennessee, Knoxville (UTK) Mechanical, Aerospace and Biomedical Engineering Department (MABE). The research was ... En savoir plus
This paper presents steady and unsteady computational results obtained from numerical solutions of the full two-dimensional governing equations for annular internal condensing flows in a channel. This is achieved by tracking the “sharp” interface while solving the flow fields using ... En savoir plus
