Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Analysis of an Air Transparent Soundproof Window System & Comparisons to Physical Test Data

M. Yeoman[1], V. Sivasailam[1], A. Tomar[2]
[1]Continuum Blue Ltd., Ystrad Mynach, UK
[2]Jaguar Land Rover Ltd, Coventry, UK

The design of windows and or other perforated structures which allow the free flow of air into & out of a building or system, while being fully soundproofed or attenuate certain frequencies is of great interest to architects and design engineers, where sound as a longitudinal wave, ... En savoir plus

Air Bubbles Motion Through Fresh Concrete During Concreting Process

E. Chuta [1], J. Jeong [2],
[1] Université Paris-Est, IRC-ESTP, Cachan, France
[2] IRC-ESTP, Cachan, France

Over the last years, the concrete technology has progressed in order to improve the quality of its use and mechanical performances. Despite the technical development known in the context of concrete, the esthetic aspect remains weakly treated. Among the esthetic problems, there is the ... En savoir plus

Chaotic Behavior of the Airflow in a Ventilated Room

A.W.M. van Schijndel[1]
[1]Eindhoven University of Technology, Eindhoven, The Netherlands

Chaotic systems may lead to instability, extreme sensitivity and performance reduction. Therefore it is unwanted in many cases. Due to these undesirable characteristics of chaos in practical systems, it is important to recognize such a chaotic behavior. The existence of chaos has been ... En savoir plus

Inclusive Routine of the Soil Surface Energy Balance in COMSOL Multiphysics®

M. Bortoloni[1], M. Bottarelli[2], Y. Su[3]
[1]Department of Engineering, University of Ferrara, Este, Italy
[2]Department of Architecture, University of Ferrara, Este, Italy
[3]Faculty of Engineering, University of Nottingham, Nottingham, UK

In ground-coupled heat pumps (GCHPs) the coupling between heat pumps and ground occurs by means of ground heat exchangers, that can be installed vertically inside boreholes (BHEs) or horizontally (HGHEs). In the horizontal installation, the heat exchangers are placed in shallow trenches ... En savoir plus

Simulation and Verification of Coupled Heat and Moisture Modelling

N. Williams Portal[1], M. van Aarle[2], and J. van Schijndel[2]
[1]Department of Civil and Environmental Engineering, Chalmers University of Technology, SE-412 96 Göteborg, Sweden
[2]Department of Architecture, Building and Planning, Technical University of Eindhoven, Eindhoven, The Netherlands

This paper includes the implementation and comparison of two types of moisture potentials for the combined transport: the natural logarithmic of the suction pressure (LPc) and the relative humidity (RH). The finite element method has been utilized to evaluate coupled 1D thermal and ... En savoir plus

Integration of the DeProF Model for Two-Phase Flow in P.M. into the Subsurface Flow Module

M. S. Valavanides [1], E. D. Skouras [2], A. N. Kalarakis [3], V. N. Burganos [2],
[1] TEI Athens, Athens, Greece
[2] FORTH/ICE-HT, Patras, Greece
[3] TEI of Western Greece, Patras, Greece

Relative permeability maps for steady-state two-phase flow in porous media, delivered by implementing the DeProF model [1] algorithm, were integrated within COMSOL Multiphysics® software [2] to resolve field-scale flows in porous media. The mechanistic model DeProF [1], predicts the ... En savoir plus

Air Flow Effect on the Temperature of a Building Integrated PV-Panel

G. Florides[1], S.A. Kalogirou[1], L. Aresti[1], R. Agathocleous[1], P. Christodoulides[1]
[1]Faculty of Engineering and Technology, Cyprus University of Technology, Limassol, Cyprus

This study examines the effect of air flow between the building integrated PV-panel and the wall. To formulate the heat exchange process for the air flowing between the PV panel and the wall, time-dependent, heat transfer partial differential equations (PDEs) are solved with COMSOL ... En savoir plus

Modeling a Novel Shallow Ground Heat Exchanger

M. Bottarelli[1], M. Bortoloni[1]
[1]Università degli Studi di Ferrara, Dipartimento di Architettura, Ferrara, Italia

Ground Heat Exchangers (GHXs) are rarely installed horizontally in linked ground source heat pumps used for space conditioning, because their energetic performance is lower than in the vertical solution. However, the horizontal one holds several advantages: it is easy to carry out and ... En savoir plus

3D FEM-Simulation of Magnetic Shape Memory Actuators

M. Schautzgy [1], U. Kosiedowski [2], T. Schiepp [3],
[1] ETO MAGNETIC GmbH, Stockach, Baden-Württemberg, Germany ; Department of Mechanical Engineering, HTWG Konstanz, Konstanz, Baden-Württemberg, Germany
[2] Department of Mechanical Engineering, HTWG Konstanz, Konstanz, Baden-Württemberg, Germany
[3] ETO MAGNETIC GmbH, Stockach, Baden-Württemberg, Germany

Electromagnetic actuators are a well-known field where finite element simulations are applied. Magnetic Shape Memory (MSM) actuators represent a new type of smart electromagnetic actuators where the MSM material elongates and contracts when applying a magnetic field. The MSM material ... En savoir plus

COMSOL Multiphysics® Simulations of Cracking in Point Loaded Masonry with Randomly Distributed Material Properties

A.T. Vermeltfoort[1], A.W.M. van Schijndel[1]
[1]Eindhoven University of Technology, Eindhoven, The Netherlands

This paper describes COMSOL Multiphysics® simulations of the stress and crack development in the area where a masonry wall supports a floor. In these simulations one of the main material properties of calcium silicate, its E-value, was assigned randomly to the finite elements of the ... En savoir plus

Premier

51–60 of 135

Dernier