Articles techniques et présentations

Recently, the researchers usually use the hydrodynamic Drude model (HDM)to investigate the nonlocal optical response of metallic nanostructure. The advantage of the HDM is easy to implement numerical calculation for larger and more complex shaped nanoplasmonic structures. For the HDM, it ... En savoir plus

Recently, the researchers usually use the hydrodynamic Drude model (HDM) to investigate the nonlocal optical response of metallic nanostructure. The advantage of the HDM is easy to implement numerical calculation for larger and more complex-shaped nanoplasmonic structures. For the HDM, ... En savoir plus

Introduction: Electric swing adsorption is a promising technique for energy efficient gas cleaning and adsorbate recovery. Contrary to state of the art temperature swing and pressure swing adsorption, one can control the mass flow independently of the heat flow for desorption in an ... En savoir plus

Resistive random-access memory (RRAM) is a non-volatile memory that operates via resistive switching between the insulating (OFF) and conducting (ON) states, representing the logical ‘0’ and ‘1’ binary states, in response to external bias. Attributes such as high memory density, fast ... En savoir plus

Single turn coils are used in pulsed magnetic technologies for which both magneto-harmonic and transient magnetic analysis are required. We suggest studying one single turn coil example made of a conducting massive coil, an optional conducting field shaper and an internal conducting tube ... En savoir plus

The modelling of a ferrite material is conventionally carried out using the Polder permeability tensor which assumes that the ferrite is saturated by a uniform magnetic field. This assumption is often inaccurate due to the constraints imposed by boundary conditions which renders the ... En savoir plus

Waveguide Structures are often used for transmission of high CW power. The inherent conductor losses in the waveguide material lead to an increase in its temperature. If appropriate thermal management is not undertaken, this high temperature may lower the breakdown threshold of the ... En savoir plus

The Levitron offers an interesting demonstration of natural magnetic levitation using permanent magnets. It is composed by a small magnetized top and a circular magnetized base with a hole on its center. The top is placed in an area where magnetic field configuration and gyroscopic ... En savoir plus

Cogging torque in permanent magnet motors and generators is characterized by a torque ripple. These torque fluctuations cause vibrations, noise and speed fluctuations. This paper presents finite element (FE) analyses results that show a previously unaddressed low frequency modulation of ... En savoir plus

Finite element method (FEM)-based solutions are known to contains errors and uncertainties due to at least four mathematical (M) and four physical (P) sources, namely, (M-1) mesh density or degrees of freedom, (M-2) mesh element types, (M-3) mesh quality such as mean aspect ratio, (M-4) ... En savoir plus