Articles techniques et présentations

This paper describes the design of an ultrasonic transducer using different lead free piezo-electric materials and evaluates their performance with different glucose levels in the human blood. COMSOL Multiphysics 4.2a was used for the simulation study using 2D axis symmetric model of ... En savoir plus

Micromachined ultrasound transducers can work as a sensor or actuator for measuring fluid speed and direction, mixing and exciting particles (sonication), taking images (ultrasonography), non-destructive testing and many other purposes in various fields. In this work, a COMSOL ... En savoir plus

We present a detailed 2D COMSOL Multiphysics® model used to determine and improve the conversion efficiency in a liquid-metal microfluidics-based portable energy transducer. To date, most work on power generation technologies has focused on the optimization of existing technologies, and ... En savoir plus

Many industrial applications require special treatments for fluid products, such as: deagglomeration, dispersion, homogenization, emulsion, special mixing or even catalysis of chemical reactions. Such effects can be obtained through cavitation in a closed ultrasonic reactor, in which it ... En savoir plus

Here we optimize the geometry: proof mass length Lm to total length L, thickness of the piezoelectric material (Tp) to total cantilever thickness (T) for obtaining the maximum stress distribution (Smax), output voltage (Vout) and power performance (Pout) of the unimorph Cantilever beam ... En savoir plus

Column Loudspeakers employ multiple drivers to get close to a radiating line source. A line source gives several acoustic advantages versus a point source, especially in highly reverberant environments. This property particularly has made column loudspeakers the preferred solution in ... En savoir plus

A COMSOL Multiphysics® simulation was used to simulate the behavior of a micro-membrane (Acoustic Pixel) to be used as a potential acoustic transducer. The MEMS and Piezoelectric devices interfaces were used to simulate such transducer. A four-cantilever spring configuration is initially ... En savoir plus

For non-imaging wearable ultrasound applications Novioscan is developing piezoelectric MEMS transducers. These transducers consist of a large array of micromechanical silicon membranes with piezoelectrically actuated regions to generate an out-of-plane displacement causing a pressure ... En savoir plus

The traveling wave ultrasonic vibration disks for dispersion of particles were designed by using of FEM analysis. The vibration disks are required specific vibration pattern, which contains three nodal lines. The vibration disk thickness was calculated to be matched the resonance ... En savoir plus

Thermal ablation driven by an acoustic heat source has tremendous potential for the treatment of diseased tissue. In many applications, such as treating tumors in the liver, bulk removal of tissue is required, and thermal ablation can reliably cause necrosis for a relatively large tissue ... En savoir plus