Articles techniques et présentations

For automotive applications, simulation methods are used to get the best audio acoustic performance. Because a loudspeaker is a non linear device, the sound pressure in the vehicle includes harmonics which are mainly created by the force factor, suspension stiffness and voice coil ... En savoir plus

In this paper, we consider the finite element modeling of multilayer transmission lines for high-speed digital interconnects. Using COMSOL we mainly focused on the modeling of the transmission structures with both cases of symmetric and asymmetric geometries. We specifically designed ... En savoir plus

The design of a magnetic resonance imaging (MRI) RF coil using finite element method-based analysis is an essential part of a multi-year research project at the National Institute of Standards and Technology, Gaithersburg, Maryland, where the goal of the project is to develop a “phantom” ... En savoir plus

电阻抗成像（EIT）技术由于分辨率较低受到专家学者的诟病，而EIT与超声技术两者的结合以及 EIT 与磁共振技术两者的结合可以提高成像的分辨率，但仍分别存在电极射频屏蔽效应以及分辨率难以进一步提高等问题。本文将磁共振成像技术和磁声电技术优势互补，采用低频振动进行激励，提出了一种新的动电成像方法，并采用 COMSOL 软件建立了二维仿真模型，使用 PDE 模式对动电阻抗成像的正问题进行了仿真研究，利用 COMSOL 的仿真结果结合Matlab软件进行了反演，实验结果可以反映出仿真模型内部的电导率分布，能够解决上述电阻抗成像结合技术存在的问题。 En savoir plus

In this paper simulation and parametric study of a PDMS valveless micropump using Fluid-Structure Interaction (FSI) appraoch is presented. The simulation for the valveless micropump were carried out in COMSOL Multiphysics software. In case of a valveless micropump diffuser/nozzle element ... En savoir plus

Bioreactor landfill is based on a homogeneous distribution of the moisture content to increase waste biodegradation. Most of studies have shown that Electrical Resistivity Tomography (ERT) can be a suitable method to study water content variation (2D and 3D). ERT is influenced by many ... En savoir plus

Modern electronic assemblies and printed circuit boards (PCB) with their sensitive structures and elements have to be protected against environmental influences by conformal coating or casting compounds. In this case the main challenge is the simultaneous curing of the polymers and the ... En savoir plus

Microgrippers are typical MEMS devices used to pick, hold and transport micro-objects. Microgrippers are widely used in the field of micro-assembly, micro-surgery and manipulation of micro-particles. Thermal microgrippers are widely used for large displacement, high accuracy and ... En savoir plus

Rotor blades for wind turbines are made of GFRP material. They have to be designed to withstand wind and weather over their approximately 20 years of lifetime. The ability to monitor the mechanical stress is crucial in order to reduce maintenance costs and to maximize operational ... En savoir plus

INTRODUCTION: Micro Electro Mechanical Systems (MEMS) are fabricated with an in-plane fabrication technology. Out-of-plane structures can be designed to be assembled to provide thermal and electrical isolation from the substrate [1 -3]. These isolations can potentially improve the ... En savoir plus