Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Structural Mechanics and Thermal Stresses

Structural Analysis of a Pressure Sensor for High Temperature Environments

S.V. De Guido[1], G.S. Masi[1], P. Vladimirovich Miodushevsky[1], L. Vasanelli[1]
[1]Department of Innovation Engineering, University of Salento, Lecce, Italy

Pressure sensors operating at the temperature higher that 500 °C are absent in the world market. Our goal is to develop a pressure sensor that can operate at the high temperature up to 700 °C. Our sensor will be made up of a ceramic sensible element and a metallic case. The sensible ... En savoir plus

Optimal Placement of Piezoelectric Plates to Control Multimode Vibrations of Rotating Beam

F. Botta[1], D. Dini[2], S. Gentili[1], G. Cerri[1]
[1]Dipartimento di Ingegneria Meccanica e Industriale, Università degli Studi di Roma Tre, Roma, Italy
[2]Department of Mechanical Engineering, Imperial College London, London, United Kingdom

Turbomachines blades are forced by a load resulting from the interaction with the fluid. The consequent vibrations, and the associated fatigue phenomena, can give catastrophic failures and the reduction of the blades life. It could be increased if damping system are used. The ... En savoir plus

Modeling the Temperature-Dependent Dynamic Behavior of a Timber Bridge with Asphalt Pavement

B. Weber[1]
[1]Empa, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland

The fundamental frequency and the corresponding damping value are the main design parameters for footbridges against excessive vibrations induced by pedestrians. Since pedestrians typically walk at a pace of 1.6–2.4 Hz, this frequency range as well as the range of the second harmonic, ... En savoir plus

Elasto-Plastic FEM Models Explain the Emplacement of Shallow Magma Intrusions in Volcanic Complexes

A. Bistacchi[1]
[1]Università degli Studi di Milano Bicocca, Milano, Italy

We present numerical models and field data that aid understanding of volcano-tectonic processes related to the propagation of inclined sheets and dykes under a stress field resulting from the inflation of a shallow magma chamber. Structural field data from the classical Cuillins cone ... En savoir plus

Modeling of the Photo-Mechanical Response of Liquid-Crystal Elastomers

G. Cerretti[1], J.-C. Gomez-Lavocat[1][2], K. Vynck[1], D.S. Wiersma[1][3]
[1]European Laboratory for Non-Linear Spectroscopy (LENS), University of Florence, Sesto Fiorentino, Italy
[2]The Institute of Photonic Sciences (ICFO), Mediterranean Technology Park, Castelldefels, Spain
[3]Istituto Nazionale di Ottica (INO), National Research Council (CNR), Florence, Italy

Liquid-crystal elastomers (LCEs) [1] have attracted a great attention in recent years due to their high potential in a wide range of applications, from microfluidics components [2] to artificial muscles [3]. The photo-mechanical response of LCEs is due to their constitutive photo ... En savoir plus

Simulation of an Ultrasonic Immersion Test for the Characterization of Anisotropic Materials

A. Castellano[1], P. Foti[1], A. Fraddosio[1], S. Marzano[1], M.D. Piccioni[1], D. Scardigno[1]
[1]DICAR, Politecnico di Bari, Bari, Italy

Introduction: Improving the capability of nondestructive evaluations requires the analysis of suitable models dealing with the physical and mechanical phenomena involved in the experiments. For example, ultrasonic tests may be a powerful, fast and effective method for nondestructive ... En savoir plus

An Innovative Solution for Water Bottling Using PET

D. Scardigno[1], A. Castellano[1], P. Foti[1], A. Fraddosio[1], S. Marzano[1], M.D. Piccioni[1]
[1]DICAR, Politecnico di Bari, Bari, Italy

Introduction: We study an innovative technology for water bottling using PET, aimed at reducing the thickness of the plastic bottles. The goals are the reduction of the amount of plastic used for a single water bottle, the reduction of the packaging costs and more environmental ... En savoir plus

The Non Linear Behavior of the Microplane Model in COMSOL

A. Frigerio[1]
[1]RSE, Milano, Italy

The safety of large civil structures is often evaluated by means of numerical models based on the Finite Element Method (FEM). In the last year, the elastic behavior of the Microplane Model was implemented in COMSOL because it is a promising approach able to overcome the limit typical of ... En savoir plus

A Parametric Study on the Dynamic Behavior of Cable Supported Bridges Under Moving Loads Affected by Accidental Failure Mechanisms

P. Lonetti[1], A. Pascuzzo[1], R. Sarubbo[1]
[1]Department of Structural Engineering, University of Calabria, Rende, Cosenza, Italy

The dynamic behavior of cable supported bridges subjected to moving loads and affected by corrosion and accidental failure mechanism in the cable suspension system is investigated. The different types of cable supported bridges are distinctively characterized by the configuration of the ... En savoir plus

Simulation of a Seal

V. Viola[1]
[1]CARCO, Basiano, Milano, Italy

Simulations of more than one type of seal have been done where the deformation and the stress of the seal itself or the pressure on the housing are of interest. According to the deformation of the seal we can modify the housing of the seal or its geometry depending on the design ... En savoir plus

Premier

411–420 of 646

Dernier