- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
The transfer molding process is a widely used method for encapsulating microelectronics and power semiconductor devices. In power electronics, it is gaining increasing importance, particularly in the automotive sector [1]. In transfer molding, an epoxy mold compound (EMC) is injected ... En savoir plus
Introduction: Polymer materials are increasingly used in machine elements such as seals and plain bearings. In particular, PEEK has gained attention for use in wind turbine applications due to its strength and resistance to harsh operating conditions. However, its low thermal ... En savoir plus
Acoustophoresis is a promising technology for the downstream processing of microalgae biorefineries(Zhang et al., 2025). By generating acoustic radiation forces and acoustic streaming, it enables precise manipulation of particles within an acoustic standing field of a microfluidic chip ... En savoir plus
The exact moment approach (EMA) is adopted to predict, without any fitting parameters, the plate height curves for polystyrene microparticles of different sizes in micropillar array columns performed by hydrodynamic chromatography. The EMA allows us to decouple the contribution of ... En savoir plus
Toxic and hazardous air pollutants are released during chemical processes. The surrounding area of a chemical facility always has a high risk of air pollution by released chemicals. Furthermore, the personnel of the facility as well as community residents have risks of sudden ... En savoir plus
Modern composite membranes for reverse osmosis (RO) and nanofiltration (NF) have an ultrathin polyamide active layer (~100 nm) that performs the ion separation. Current theoretical models explain solute and water fluxes by computing concentration and potential gradients developed in one ... En savoir plus
In the nuclear fuel industry, the dry conversion process is employed to transform crystalline UF6 to UO2 powder, in order to produce fuel pellets. The quality of the finished product highly depends on the process input parameters, and it is imperative to understand accurately the full ... En savoir plus
During the hot extrusion process, a cylindrical pre-heated billet is inserted into a container and is forced by a hydraulic press to flow through a shaped die in order to obtain, as final product, a profile with a constant cross-section (Fig.1). Aluminum extrudates have become prominent ... En savoir plus
The motion of a fluid can be described by the incompressible Navier-Stokes equations (NSE). A single particle embedded in the fluid experience a resistance resulting from a friction force. The friction force depends typically on the velocity but is directed in the opposite direction to ... En savoir plus
Started in March 2020, the SOFITT project (Saturated Open-Cell Foams for Innovative Tribology in Turbomachinery), funded by the ANR (French National Research Agency), aims to develop reliable, high-performance, and environmentally friendly solutions for the guidance and support systems ... En savoir plus