Plus de 5000 articles et présentations sur la Simulation Multiphysique

A CFD Analysis of the Operating Conditions of a Multitube Pd Membrane for H2 Purification

B. Castro-Dominguez[1], R. Ma[1], A. G. Dixon[1], Y. H. Ma[1]
[1]Chemical Engineering Department, Worcester Polytechnic Institute, Worcester, MA, USA

The optimization of operating conditions in multitube membrane modules is highly complex. The multiple physics and irregular geometries involved create a challenge for predicting their behavior. This work analyzes the performance of H2 purification through a module containing seven ... En savoir plus

A Single Particle Thermal Model for Lithium Ion Batteries

R. Painter[1], S. Berryhill[1], L. Sharpe[2], S. K. Hargrove[2]
[1]Department of Civil Engineering, Tennessee State University, Nashville, TN, USA
[2]Department of Mechanical Engineering, Tennessee State University, Nashville, TN, USA

COMSOL® "Single Particle Model for Lithium-Ion Batteries” (Model ID: 14527) is generalized to include an energy balance. This is accomplished by approximating the solution phase polarization as a function of current and temperature. The theoretical approach for this work is similar to ... En savoir plus

Diffusion and Reaction in Fe-Based Catalyst for Fischer-Tropsch Synthesis Using Micro Kinetic Rate Expressions

A. Nanduri[1], P. L. Mills[1]
[1]Department of Chemical & Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA

Fischer-Tropsch synthesis (FTS) is a highly exothermic polymerization reaction of syngas (CO+H2) in the presence of Fe/Co/Ru-based catalysts to produce a wide range of paraffins, olefins and oxygenates, often known as syncrude. Multi-Tubular Fixed Bed Reactors (MTFBR) and Slurry Bubble ... En savoir plus

H2SO4 Catalysis: Perspective and Opportunities for Reducing SO2 Emissions

P. L. Mills[1], A. Nagaraj[2]
[1]Department of Chemical & Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA
[2]Department of Environmental Engineering, Texas A&M University, Kingsville, TX, USA

Introduction: Development of next-generation chemical processes that have zero emissions is a key environmental objective for sustainable development. The manufacture of H2SO4 by the air oxidation of SO2 to SO3 is an important technology where an opportunity exists for new catalyst ... En savoir plus

Transport-Kinetic Interactions for SO2 Oxidation to SO3 in Particulate and Monolith Catalysts

P. L. Mills[1], A. Nagaraj[2]
[1]Department of Chemical & Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA
[2]Department of Environmental Engineering, Texas A&M University, Kingsville, TX, USA

Introduction: Development of next-generation chemical processes that have zero emissions is a key environmental objective for sustainable development. The manufacture of H2SO4 by the air oxidation of SO2 to SO3 is an important technology where an opportunity exists for new catalyst ... En savoir plus

Simulation of Gravity-Driven Flow Through a Microfluidic Device on a Rocker Platform

B. Srinivasan[1], J. Hickman[1], M. Shuler[2]
[1]University of Central Florida, Orlando, FL, USA
[2]Cornell University, Ithaca, NY, USA

A micropump delivers fluid between different components of a microfluidic device in a controlled manner. The elimination of micropump can reduce the design complexity, simplify fabrication, shrink the device footprint and decrease the set-up time required for the operation of the ... En savoir plus

COMSOL Multiphysics® Simulations of Graphene Chemical Vapor Deposition (CVD) Growth

K. M. Al-Shurman[1], H. Naseem[1]
[1]The Institute for Nanoscience & Engineering, University of Arkansas, Fayetteville, AR, USA

Chemical vapor deposition (CVD) is a promising effective method for synthesis of graphene films. CVD graphene film is obtained from hydrocarbon species such as CH4 through complex catalytic chemical reactions on the surface of the catalyst. Therefore, studying the catalytic reaction ... En savoir plus

Kinetic Parameters for Gas Phase Photocatalysis: Analytic Versus CFD Approach

S. Denys[1], S. Verbruggen[1], S. Lenaerts[1]
[1]Sustainable Energy and Air Purification, Department of Bioscience Engineering, University of Antwerp, Antwerp, Belgium

Introduction Among the advanced oxidation processes (AOPs) for removal of volatile organic compounds (VOCs) from air, photocatalytic oxidation (PCO) is considered a very promising technology [1,2]. PCO can achieve mineralization of harmful VOCs to CO2 and H2O using only UV light [3]. A ... En savoir plus

Calibration of a Bio-Kinetic Model to Simulate Microalgae Growth

A. Solimeno[1], J. Garcia[2]
[1]Department of Hydraulic, Maritime and Environmental Engineering, Universitat Politècnica de Catalunya, Barcelona, Spain
[2]Universitat Politecnica de Catalunya, Barcelona, Spain

The aim of present work is to present and calibrate a new mechanistic model that includes physical and biokinetic processes to reproduce the algae growth in photobioreactor or ponds during long-term scenarios. A COMSOL Multiphysics® model is used to implement the microalgae processes ... En savoir plus

Modelling of Reactive Non-Isothermal Mixture Flow and its Simulation in COMSOL Multiphysics® Software

V. Orava[1,2], O. Soucek[1], P. Cedula[2]
[1]Charles University in Prague, Prague, Czech Republic
[2]Zurich University of Applied Sciences, Winterthur, Switzerland

I introduce a model of fluidized reactor which, in presence of heterogeneous platinum-based catalyst, decomposes liquid formic acid producing gaseous mixture of carbon dioxide and hydrogen as the product. I treat the physical system as a (Class II) mixture of four constituents - namely ... En savoir plus

Articles techniques et présentations

Recherche rapide