Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Toutes

Boston 2025

Amsterdam 2025

Terme recherché:

Heat Transfer and Phase Change

Thermal Printing on Composite Media

W.T. Vetterling
ZINK Imaging, Bedford, MA, USA

In direct thermal printing, media is exposed to heat pulses from a print head carrying a linear array of resistive heaters. In this study we investigate the degree to which a thin substrate can be combined with a more compressible sub-layer to provide a composite structure that will hug ... En savoir plus

Two Dimensional Finite Element Heat Transfer Analysis of a Buried Refined Bitumen Pipeline During Initial Start-up, Shutdown Following Initial Start-Up, and Normal Operation

R. Sisco
Worcester Polytechnic Institute, Worcester, MA, USA

This body of work uses the two dimensional finite element heat transfer capabilities of the conduction application mode within COMSOL to examine the temperature distribution in the fluid, pipe wall, insulation, and surrounding soil of a prototypical bitumen pipeline operating in a cold ... En savoir plus

Analysis of Burning Candle

J.S. Crompton, L.T. Gritter, S.Y. Yushanov, and K.C. Koppenhoefer
AltaSim Technologies LLC, Columbus, OH, USA

Analysis of burning candles is extremely complex; combustion produces a highly non-linear temperature profile through the flame in which local temperatures may exceed 1400 °C. Heat transfer includes radiation, conduction and convection components and the low melting point of the candle ... En savoir plus

Dimensionless versus Dimensional Analysis in CFD and Heat Transfer

H. Dillon[1], A.F. Emery[1], A. Mescher[1], and R.J. Cochran[2]
[1]University of Washington, Seattle, WA, USA
[2]Applied CHT, Seattle, WA, USA

Students in engineering and science are often exposed early in their studies to non dimensional analysis. When it comes to solving fluid flow/heat transfer problems, many solutions, particularly industrial ones, are based on finite element/finite volume using dimensioned quantities. In ... En savoir plus

Modeling Residual Stresses in Arc Welding

F. Roger[1], and A. Traidia[2]
[1]ENSTA Paristech, Paris, France
[2]AREVA NP, Saint Marcel, France

The prediction of mechanical response of assemblies during arc welding necessitates the knowledge of thermal history of the components and the constitutive behavior of the materials. COMSOL can simulate thermal and structural interaction but it needs to evaluate the time evolution of ... En savoir plus

Modeling the Internal Pressure Distribution of a Fuel Cell

P.A. Koski[1] and M.S. Mikkola[1]
[1]Department of Applied Physics, Helsinki University of Technology, Espoo, Finland

A 3D FEM (Finite Element Method) model for predicting the internal pressure distribution of a fuel cell stack is presented. The model includes contact pair boundary conditions between the most critical components, thermal expansion and Young's moduli as a function of temperature. The ... En savoir plus

The Use of COMSOL in Teaching Heat and Moisture Transport Modeling in Building Constructions

A.W.M. van Schijndel[1] and H.L. Schellen[1]
[1]Eindhoven University of Technology, Eindhoven, The Netherlands

This paper presents the use of the multiphysics package COMSOL for teaching heat and moisture transport modeling in the research area of building physics. It includes a description on how COMSOL works and six exercises with 2D, 3D, steady state and transient models. It is concluded that ... En savoir plus

Thermal and Electrostatic Analyses of One Dimensional CFC Diagnostic Calorimeter for SPIDER Beam Characterisation

M. De Muri[1][2], M. Dalla Palma[1], P. Veltri[1], A. Rizzolo[1], N. Pomaro[1], and G. Serianni[1]
[1]Consorzio RFX, Euratom-ENEA Association, Padova, Italy
[2]Dipartimento di Ingegneria Elettrica, Padova University, Padova, Italy

The main purpose of SPIDER (Source for the Production of Ions of Deuterium Extracted from RF plasma) test facility is the investigation and optimization of a negative ion beam produced by the full size ion source for ITER NBIs (Neutral Beam Injectors). Thermal, transient, non-linear FE ... En savoir plus

Bobbin Tool Friction Stir Welding: A Moving Geometry Model

J. Hilgert[1], H. Schmidt[2], and J. Dos Santos[1]

[1]GKSS Forschungszentrum GmbH, Geesthacht, Germany
[2]Danmarks Tekniske Universitet, Kgs. Lyngby, Denmark

Based on the example of a bobbin tool Friction Stir Welding process model a technique to model thermal processes with a moving geometry in COMSOL is introduced. The described approach allows modeling the transient temperature fields in setups that are governed by a large relative ... En savoir plus

Modelling of Melt Cast Cooling and Solidification Processes for Explosives

P. Lamy-Bracq[1] and C. Coulouarn[1]
[1]Nexter Munitions, Tarbes, France

A solidification process of casting explosives in shell is studied in this paper. An enthalpy method approach is used to model the solidification process. Both the thermal and mechanical effects are taken into account. An ALE (Arbitrary Lagrangian-Eulerian) method is used to represent ... En savoir plus

Premier

991–1000 of 1213

Dernier