Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Ici vous trouverez les présentations issues des Conférences COMSOL à travers le monde. Réalisées par des utilisateurs de COMSOL Multiphysics, ces présentations explorent tous les domaines actuels d'innovation. Les applications couvrent pratiquement tous les secteurs industriels et impliquent des phénomènes électriques, mécaniques, fluidiques et chimiques. Utilisez la recherche rapide pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt.

Consultez les proceedings de la Conference COMSOL 2024

Toutes

Boston 2024

Munich 2023

Terme recherché:

Heat Transfer and Phase Change

Numerical Modeling of the Original and Advanced TEMKIN Reactor for Catalysis Experiments in Laboratory Scale

D. Götz[1], M. Kuhn[1], P. Claus[1]
[1]Ernst-Berl-Institute/Chemical Technology II, Darmstadt, Germany

Many industrial, especially heterogeneously catalysed, processes are characterised by a strong interaction between the reaction kinetics and transport phenomena. Because experiments in laboratory scale can be very time- and cost-intensive, Temkin andKul’kova developed a new reactor ... En savoir plus

Numerical Simulation of Evaporation Processes in Electron Beam Welding

E. Salomatova[1], D. Trushnikov[1], V. Belenkiy[1], V. Tsaplin[1]
[1]Perm National Research Polytechnic University, Perm, Russia

In this paper describes an original method for indirect measurement of the vapor pressure and temperature in the keyhole in electron beam welding. This method is based on the determination of the concentration of chemical elements in the vapor above the welding zone. Taking into account ... En savoir plus

Thermomechanical Effects of the Packaging Molding Process on the Chip in Integrated Circuits

N. Semmar[1], M. Fournier[1], P. S. Alleaume [2], A. Seigneurin [3], , ,
[1]GREMI-UMR7344, CNRS/University of Orléans, Orléans, France
[2]Collegium Sciences et Techniques, Orléans, France
[3]ST Microelectronics Tours SAS, Tours, France

Usually, in integrated circuits, the chip is brazed on leadframe and then, a polymer resin is molded around to create the packaging. On the first hand, the molding process at high temperatures will induce thermomechanical stress on the chip. As the leadframe, the chip and the braze have ... En savoir plus

Simulation of Helmholtz Resonators for Optical Gas Sensing: Comparison Between Pressure Acoustics and Thermoacoustics

B. Parvitte[1], C. Risser[1], R. Vallon[1], V. Zéninari[1]
[1]Université de Reims, Reims, France

Among optical gas sensing methods, photoacoustic (PA) spectroscopy combined with a laser source has proven to be a very robust and sensitive method for trace gas detection. COMSOL Multiphysics® software was used to calculate the frequency response of differential Helmholtz resonator ... En savoir plus

Inclusive Routine of the Soil Surface Energy Balance in COMSOL Multiphysics®

M. Bortoloni[1], M. Bottarelli[2], Y. Su[3]
[1]Department of Engineering, University of Ferrara, Este, Italy
[2]Department of Architecture, University of Ferrara, Este, Italy
[3]Faculty of Engineering, University of Nottingham, Nottingham, UK

In ground-coupled heat pumps (GCHPs) the coupling between heat pumps and ground occurs by means of ground heat exchangers, that can be installed vertically inside boreholes (BHEs) or horizontally (HGHEs). In the horizontal installation, the heat exchangers are placed in shallow trenches ... En savoir plus

Inverse Method for Calculating the Temperature-Dependent Thermal Conductivity of Nuclear Materials

T. Pavlov[1,2], P. Van Uffelen[1], L. Vlahovic[1], D. Staicu[1], M. Wenman[2], R. W. Grimes[2], ,
[1]Institute for Transuranium Elements, Eggenstein-Leopoldshafen, Germany
[2]Department of Materials, Imperial College London, London, UK

The high temperature measurement of thermal conductivity is vital for predicting nuclear fuel performance both during reactor operation and accident conditions. The proposed method uses experimental thermograms obtained via high temperature laser-flash heating of a disc-shaped sample in ... En savoir plus

Constraints on Ocean Floor Permeability from Hydrothermal Modelling

S. Titarenko[1], A. McCaig[1]
[1]School of Earth and Environment, University of Leeds, Leeds, UK

The Atlantis massif is a domal submarine seamount close to the mid-Atlantic Ridge at 30 °N. Close to the crest of the Massif, the Lost City hydrothermal field (LCHF) has been active for at least 120,000 years, venting fluids with a temperature of 40-90 °C. 5 km north of Lost City, a ... En savoir plus

Modelling of a Wool Hydrolysis Reactor

M. Giansetti[1], A. Pezzin[1], S. Sicardi[1], G. Rovero[1]
[1]Politecnico di Torino, Torino, Italy

The Life+ GreenWoolF project is aimed at demonstrating that green hydrolysis with superheated water is an effective way to convert wool wastes into organic nitrogen fertilizers. The core of the process is represented by the reaction tank (Figure 1) in which the hydrolyses reaction takes ... En savoir plus

Multiphysics Simulation of Polymer-Based Filters for Sub-Millimeter Space Optics

N. Baccichet[1], G. Savini[1]
[1]Department of Physics and Astronomy, University College London, London, UK

Multiphysics Simulation of Polymer-Based Filters for Sub-Millimeter Space Optics This work focuses its analysis on polymer-based filters used in space-borne astronomical instrumentation for Cosmic Microwave Background Radiation and Far-Infrared observations. Most of these observatories ... En savoir plus

Simulation of Cascaded Thermoelectric Devices for Cryogenic Medical Treatment

P. Aliabadi[1], S. Mahmoud[1], R. K. AL-Dadah[1]
[1]Mechanical Engineering Department, University of Birmingham, Birmingham, UK

This study is focused on using a thermoelectric device (TED) as an alternative to the cryogenic liquid for cooling cryosurgical probe used for cancerous tissue ablation. Thermoelectric device, namely Peltier, is a solid state device which converts electric current to thermal gradient. In ... En savoir plus

Premier

1011–1020 of 1162

Dernier