Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Toutes

Boston 2025

Amsterdam 2025

Terme recherché:

Heat Transfer and Phase Change

Increasing Heat Transfer in Microchannels with Surface Acoustic Waves

S. Berry[1]
[1]Massachusetts Institute of Technology: Lincoln Laboratory, Lexington, MA, USA

In this numerical study, surface acoustic waves (SAWs) are evaluated as a potential disruptive flow technology for enhancing heat transfer in microchannels. Using COMSOL Multiphysics® software, the physics governing acoustics, single-phase-fluid flow and heat transfer are coupled. The ... En savoir plus

Study of Supercritical Coal Fired Power Plant Dynamic Responses for Grid Code Compliance

A. Gil-Garcia[1], I. Kings[1], B. Al-Duri[1]
[1]University of Birmingham, School of Chemical Engineering, Edgbaston, Birmingham, UK

In clean coal technologies, improving energy conversion efficiency is one of the most important directions. Compared to traditional subcritical power plants, pressure-increased supercritical power plants improve the plant energy efficiency from 35% up to 45%. This work presents a study ... En savoir plus

Temperature Gradients Controlled Broadband Acoustic Omnidirectional Absorber

F. Qian[1], L. Quan[1], X. Liu[1]
[1]Institute of Acoustics and School of Physics, Nanjing University, Nanjing, China

Previous research into acoustic omnidirectional absorber (AOA) has shown the feasibility of forming acoustic black hole to guide the incident wave into the central absorptive cavity. However, major restrictions to practical applications exist due to complexity of designing metamaterials ... En savoir plus

Simulation and Experimental Validation of Direct Heating of Dhruva Fuel Rod for β Heat Treatment

B. Patidar, A. P. Tiwari[1], V. Patidar[1], M. M. Hussain[1], K. K. Abdulla[1]
[1]Bhabha Atomic Research Centre, Mumbai, Maharashatra, India

β heat treatment of Uranium rods is carried out for randomization of oriented grains (called texture) developed during hot rolling or hot extrusion operation. During this process, Uranium rods undergo heating of up to 740 Deg C followed by water quenching. The objective of this work is ... En savoir plus

Finite Element Analysis of Transient Ballistic-Diffusive Heat Transfer in Two-Dimensional Structures

S. Hamian[1], T. Yamada[2], M. Faghri[3], K. Park[1]
[1]University of Utah, Salt Lake City, UT, USA
[2]Lund University, Lund, Sweden
[3]University of Rhode Island, Kingston, RI, USA

For the last two centuries, the conventional Fourier heat conduction equation has been used for modeling a diffusive nature of macroscale heat conduction by considering the energy conservation and Fourier's linear approximation of heat flux. However, it cannot accurately predict heat ... En savoir plus

Multiphysics Modeling of a Grain Storage Chamber

P. Guha[1], P. Sharma[1], V. Malhotra[1], S. Mishra[1]
[1]CSIR - Central Scientific Instruments Organisation, Chandigarh, India

Proper storage of grains depends on minimizing attacks of insects, fungi, mites, etc. Development of such pests can be controlled by controlling the temperature of the storage chamber. Hence, before designing grain storage chambers, mathematical modeling and numerical simulations should ... En savoir plus

Implementation of a Viscoelastic Material Model to Simulate Relaxation in Glass Transition

Z. Zheng[1], R. Zhang[1]
[1]Corning Incorporated, Corning, NY, USA

Introduction: Glass relaxation occurs in a range of temperature during transition from equilibrium to super-cooled liquid. Viscoelastic material model can be applied to simulate glass behavior during the glass transition regime and to predict the glass deformation and stress evolution. ... En savoir plus

Heat Transfer in Crossflow Heat Exchangers for Application with Microreactors

R. Pryor[1]
[1]Pryor Knowledge Systems, Inc., Bloomfield Hills, MI, USA

This paper explores methods of improving the heat transfer coefficient in a crossflow heat exchanger as would be employed in conjunction with an experimental or production microreactor. This derivation of the Cross-Flow Heat Exchanger from the COMSOL Multiphysics® software Model Library ... En savoir plus

Study of the Process, Design, and Operating Parameters Effect on the Efficiency of the Process Mill

A. K. Farouk[1]
[1]Department of Mathematics & Natural Science, University of Stavanger, Sandnes, Rogaland, Norway

This study is to investigate the velocity pattern and the velocity magnitude of the cuttings that is being processed in the process mill as a result of the rotating hammers. The process mill consists of a horizontal cylindrical shell equipped with renewable liners and rotating hammers ... En savoir plus

Enhanced Transient Modeling of Hybrid Photovoltaic Air (PVT) Module

R. Kiflemariam[1], M. Almaz[1], F. Zevallos[1], C. Lin[1]
[1]Department of Mechanical & Materials Engineering, Florida International University, Miami, FL, USA

A 2D transient heat conduction model was created in COMSOL Multiphysics® software to study the performance of photovoltaic-thermal (PVT) water system. The model captures the variation of important environmental and system parameters such as outside temperature, solar irradiation, air ... En savoir plus

Premier

1111–1120 of 1213

Dernier