Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Toutes

Boston 2025

Terme recherché:

"electromagnetic*"

On The Modelling Of Electrowetting Using COMSOL Multiphysics

J.F. Dannenberg, J. Brinkert, and E.A.D. Lamers
Reden b.v., Hengelo (ov.), The Netherlands

One of the upcoming technologies in displays is that of the electrowetting displays. A surface can be covered by a colored oil or transparent water using a voltage to increase or decrease the wettability of the surface. A simulation of the behavior of such a thin film of oil in water, ... En savoir plus

Numerical Analysis of the 3-omega-method

M. Feuchter, and M. Kamlah
Karlsruhe Institute of Technology (KIT)
Institute for Applied Materials
Karlsruhe, Germany

Determining the thermal conductivity of condensed matter attracted much attention in past years. While several techniques exist to measure the thermal conductivity of solids or thin films, the 3-omega-method is one of the most well-established due to its high accuracy. First, COMSOL ... En savoir plus

Accurate Parameters Extraction of Multiconductor Transmission Lines in Multilayer Dielectric Media

S. Musa[1], M. Sadiku[1], and O. Momoh[2]
[1]Roy G. Perry College of Engineering, Prairie View A&M University, Prairie View, TX
[2]Indiana University-Purdue University

Development of very high speed integrated circuits is currently of great interest for today\'s technologies. This paper presents the quasi-TEM approach for the accurate parameters extraction of multiconductor transmission lines interconnect in single, two, and three-layered dielectric ... En savoir plus

Study of Subwavelength Gratings to Understand Their Polarization Behaviour

M. G. Sridharan[1], A. Prabhakar[2], and S. Bhattacharya[2]
[1]Photonics Group, Department of Electrical Engineering, Indian Institute of Technology Madras, Chennai, India
[2]Department of Electrical Engineering, Indian Institute of Technology Madras, Chennai, India

Phase gratings are used in many applications owing to their high transmission and thus higher diffraction efficiencies. COMSOL is based on finite element modeling and is chosen for 2 reasons; firstly, because it can handle complex 2-D and 3-D geometries and secondly, it can handle the ... En savoir plus

Optimization of Thermoelectric Energy Harvester using COMSOL Multiphysics

A. Takezawa, and M. Kitamura
Division of Mechanical System and Applied Mechanics
Faculty of Engineering
Hiroshima University
Japan

This paper discusses a geometrical optimization method for thermoelectric generators. Our method provides the optimized geometry in accord with various arbitrary conditions such as types of materials, volume of materials, temperatures of installation position, and shape of installation ... En savoir plus

Elucidating the Mechanism Governing the Cell Rotation Behavior Under DEP

G. Zhang[1], Y. Zhao[1], J. Brcka[2], J. Faguet[2], E. Lee[2]
[1]Clemson University, Clemson, SC, USA
[2]TEL U.S. Holdings, Inc., U.S. Technology Development Center, Austin, TX, USA

In our experiments with manipulating cells with DEP, we noted that some cells are constantly spining. By hypothesing that the cell spining is caused by the non-circular shape of the cell body and the off-centered location of its nucleus and that the rotation direction depends on the ... En savoir plus

Efficient Simulation of 3D Electro-optical Waveguides Using the Effective Refractive Index Method

M. Herlitschke, M. Blasl, and F. Costache
Fraunhofer Institute for Photonic Microsystems
Dresden, Germany

3D FEM simulation of millimeter-scale, complex electro-optically induced waveguide based devices demands the use of grids with more than several million nodes. Hence the simulation could take substantial time and require large amounts of available memory. This paper presents a ... En savoir plus

3-D Design, Electro-Thermal Simulation and Geometrical Optimization of Spiral Platinum Micro-Heaters for Low Power Gas Sensing Applications Using COMSOL 4.1

V. Bansal, D. Kumar, B. Prasad, and A. Gujjar
Electronic Science Department

In this paper a thermal electric finite element method (FEM) analysis was used to investigate the thermal properties of individual electrically driven platinum micro-heaters. The geometric optimization for the micro-heater was performed by simulating a wide range of possible geometries ... En savoir plus

Simulations of Polymer Based Micro Heater Operated at Low Voltage

M. Gayake[1], D. Bodas[2], and S. A. Gangal[1]
[1]Department of Electronic science, University of Pune, India
[2]Centre for Nanobioscience, Agharkar Research Institute, India

This paper presents a design of polymer based micro heater operating in the temperature range of 200- 250°C which could be operated at low voltage (battery operated). The micro heater has been designed and simulated using COMSOL 4.1, FEM simulation tool. Simulation was performed for ... En savoir plus

Finite Element Analysis of Defibrillation Current Density in Pregnant Women

A. Jeremic[1], E. Khosrowshahli[1]
[1]McMaster University, Hamilton, ON, Canada

Although resuscitation during pregnancy is relatively uncommon and rarely causes death, they have a particularly large impact in terms of the mortality of the unborn child and long-term effects on families and society as whole. In this paper, we present a new 3D finite element model of a ... En savoir plus

Premier

1051–1060 of 1120

Dernier