- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Since 2011, LATMOS has been involved in the development of Micro-ARES, an electric field sensor forming part of the DREAMS science payload of the ExoMars 2016 Schiaparelli entry, descent and landing demonstrator module (EDM). Micro-ARES is dedicated to the very first measurement and ... En savoir plus
In this work, a bimetallic strip based thermal sensor was designed using MEMS module of COMSOL Multiphysics® software to monitor the temperature rise in insulating oil which was used as coolant in transformers. The bimetallic strip was designed with different shapes such as cylindrical, ... En savoir plus
The integration of machine learning (ML) techniques into geophysical exploration and underwater mapping has emerged as a transformative approach for interpreting complex sensor data. This paper presents a comprehensive framework for using COMSOL Multiphysics to develop and validate ... En savoir plus
An artificial hand is the one that replaces the hand lost through trauma, disease, or congenital conditions. The proposed design is to simulate a sensor, used in prosthetic hand so as to measure the pressure required to hold the object, using COMSOL Multiphysics®. The physical parameters ... En savoir plus
Blind cave fish are capable of sensing flows and movements of nearby objects even in dark and murky water conditions with the help of arrays of pressure-gradient sensors present on their bodies called lateral-lines. To emulate this functionality of lateral-lines for autonomous underwater ... En savoir plus
A MEMS based electrostatic field sensor is presented which uses capacitive interrogation of an electrostatic force deflected microstructure. The deflection of the sensor is calculated both by simulation and theoretical model and it has been shown that the results of the simulations have ... En savoir plus
This research presents the design, simulation, and characterization of novel resonator structures based on the principles of coupling electric fields using periodic metamaterial-inspired configurations using COMSOL Multiphysics RF module. The resonators are meticulously crafted to ... En savoir plus
3D model of MEMS based SAW gas sensor is designed using Focused Inter Digital Transducers design. Surface displacement & Electrical potential are analyzed at resonance & anti-resonance frequencies. Operating frequency is from 8.7 MHz which acts as start band and 9.2 MHz as stop ... En savoir plus
A high performance MEMS Pirani sensor (VAC_03) was designed and optimized based on analytics. Due to the fact that this MEMS Pirani sensor is a 3D-Object, the calculation of the thermal radiation by analytics is limited. As the radiation behavior in the system is, beside the solid ... En savoir plus
Pressure sensors operating at the temperature higher that 500 °C are absent in the world market. Our goal is to develop a pressure sensor that can operate at the high temperature up to 700 °C. Our sensor will be made up of a ceramic sensible element and a metallic case. The sensible ... En savoir plus