- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Laser drilling of titanium and its alloys is widely used in aerospace industry, as it offers selective removal of material at high accuracy and speed. However, laser drilling often inherits defects such as large heat affected zone, micro cracks and recast layer. These defects depend upon ... En savoir plus
We present the design and performance simulations for a microwave cavity for use in novel compact cold atom atomic clocks. Design goals for such a microwave cavity are a resonance frequency at the Rubidium ground-state transition frequency of 6.835 GHz, combined with a moderate quality ... En savoir plus
Accurate, real-time measurement of arterial oxygen partial pressure (PaO₂) is essential for managing respiratory diseases and critical care conditions. Traditional arterial blood sampling for PaO₂ is invasive, painful, and provides intermittent snapshots rather than continuous ... En savoir plus
Quasi-static 2D-MEMS vector scanners are micro-opto-electro-mechanical systems (MOEMS) made of monocrystalline silicon. The primary application for these controllable micromirrors is the high dynamic and precise deflection of laser beams, for example in light detection and ranging ... En savoir plus
The process-induced deformation in the DED fabricated part is a critical issue to the scaling of the technology. Currently, an inefficient and expensive experiment trial-and-error approach is utilized to tackle this issue, however it is not feasible for large parts. Researchers have ... En savoir plus
Temperature measurement of nanoparticles (NPs) under heating is an important technique in order to achieve potential applications such as photothermal cancer therapy and nanofabrication. We implemented the method to estimate the local temperature of a laser-heated gold NP on glass ... En savoir plus
This paper presents a numerical analysis of magnetic devices, dipole, quadrupole and undulator and a THz Free Electron Laser (FEL) electron-beam recovery system. Free Electron Laser are an important source of coherent radiation being used in the study of chemical properties of ... En savoir plus
The aim of the study is to predict the formation of porosities in the case of spot laser welding of tantalum. During the interaction, a deep and narrow cavity, called the keyhole, is generated. At the end of the interaction, surface tension provokes the collapse of the keyhole. Gas ... En savoir plus
Laser percussion drilling is widely used in the aerospace industry to produce cooling holes in jet engine components. This process is a thermal, contact-free process which involves firing a sequence of focused optical pulses onto a target material [1-4]. During each optical pulse, the ... En savoir plus
Photothermal therapy through Gold Nanorods (GNRs) is a new approach for the minimally invasive treatment of cancerous tissue. In order to design the proper settings, it is important to study the thermal effect that are induced close to the nanoparticle (nanoscale model), in the close ... En savoir plus