- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Découvrez comment la simulation multiphysique contribue à faire progresser la recherche dans le monde entier grâce à des applications innovantes
La modélisation et la simulation multiphysiques stimulent l'innovation dans l'industrie et le monde universitaire, comme en témoignent les nombreuses applications présentées chaque année par des ingénieurs, des chercheurs et des scientifiques dans leurs articles techniques et posters lors des conférences COMSOL.
Inspirez-vous des travaux présentés lors des dernières conférences, rassemblés ci-dessous. Pour trouver une présentation en particulier ou affiner votre recherche par domaine d'application, année ou lieu de conférence, utilisez l'outil de recherche rapide.
Consultez les proceedings de la Conference COMSOL 2026
This case study explains the work we undertook where we modelled an Induction heating system in COMSOL Multiphysics simulation software to correlate the simulation results with actual measurements. The simulated results were cross checked with several different measurement scenarios, ... En savoir plus
锂离子电池在便携式电子设备领域占据主导地位,并显著推动了电动汽车的商业化进程。当前全球研发重点集中于开发具有高能量密度、快速充放电能力、高功率输出、低成本及高安全性的电池系统。在材料选择中,机械强度的耐久性与长周期循环的结构完整性成为关键评价指标。锂离子电池内部存在显著的电化学-力学耦合行为,表现为大变形、塑性流动、裂纹扩展与疲劳等现象,进而引起电极剥离、孔隙闭合以及副反应加速等多种失效模式。其中,正极颗粒的破裂等力学-电化学退化机制是限制锂离子电池性能的主要因素之一,因此深入研究正极材料在多场耦合条件下的响应机制,对实现下一代高能量密度电池至关重要。 钴酸锂 ... En savoir plus
The increasing demand for electrochemical energy storage (EES) in stationary applications underscores the urgent need for advanced battery technologies. Among these, zinc-based systems, particularly rechargeable zinc-air flow batteries (RZAFBs), are gaining attention due to their ... En savoir plus
The presented model approach offers a computational efficient tool to analyze the influences of geometrical design details, material selection and operational conditions on the electro-thermal behavior of a full Li ion battery cell geometry. It considers typical aspects as anisotropic ... En savoir plus
Multi-Scale and Multi-Dimensional (MSMD) modeling approaches have been proposed to simulate the thermal, electrical distributions and concentration behaviors of large size pouch cell. This approach is based on coupling of the energy balance with the Newman’s electrode model. Newman’s 1D ... En savoir plus
Maritime transport contributes to about 3% of global greenhouse gas emissions. Proton exchange membrane (PEM) fuel cells are considered among the most promising clean technologies for decarbonizing the maritime sector. Some of the main benefits of PEM fuel cells include highly efficient ... En savoir plus
Vanadium redox flow batteries (VRBs) are a promising new energy storage technology designed for use in long term applications such as uninterruptible power supply and coupling with renewable energy sources (i.e. wind and solar). Crossover is the undesired transport of vanadium ions ... En savoir plus
Lithium plating on the graphite anode is a significant factor contributing to the degradation of cell capacity, initiation of internal short circuits, and escalation of thermal runaway in lithium-ion batteries. Non-intrusive detection methods for lithium plating are critical for the safe ... En savoir plus
