Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Design of FIDT for 3D Analysis of MEMS Based Gas Sensor Using SAW Technology

V. S. P. Rajesh [1],
[1] St. Mary's Group of Institutions, Hyderabad, India

3D model of MEMS based SAW gas sensor is designed using Focused Inter Digital Transducers design. Surface displacement & Electrical potential are analyzed at resonance & anti-resonance frequencies. Operating frequency is from 8.7 MHz which acts as start band and 9.2 MHz as stop ... En savoir plus

Using Multiphysics for Detecting Atmospheric Ice Through MuVi Graphene - Atmospheric Icing Sensor

U. N. Mughal [1],
[1] Narvik University College, Norway

This paper is a preliminary design study to develop a hybrid atmospheric icing sensor which have an adequate potential to detect an icing event, icing type and icing rate together with icing load. The physics to detect icing event and icing type have been numerically understood using ... En savoir plus

Convected Acoustic Physics Interfaces for Acoustic Resonance Technology

Antonio Jimenez Garcia¹, Elisabetta Merico¹
¹FT Technologies Ltd

Acoustic Resonance (Acu-Res®) Technology [1] is at the core of FT wind sensors, operating by measuring phase shifts between a pair of transducers caused by fluid flow within an acoustic resonator. Three piezoelectric transducers are placed in a triangular formation on the top reflector ... En savoir plus

Carbon Nanotube Based Mass Sensor Using Atomic Resolution Nanomechanical Resonators

M. Roshini[1], G .B. Priyanga[1], K. C. Devi[1]
[1]PSG College of Technology, Coimbatore, Tamil Nadu, India

The objective of this paper is to design and simulate Carbon Nano-Tube (CNT) based mass sensor that determines extremely low measures of molecules using COMSOL Multiphysics® software. The ultimate goal of this nanomechanical resonator sensor is that it allows detection at single ... En savoir plus

Simulation of a Capacitive Sensor for Wear Metal Analysis of Industrial Oils

P. Venkateswaran[1], R. Minasamudram[1], P. Agrawal[2]
[1]Siemens Technology and Services Pvt. Ltd, Bangalore, Karnataka, India
[2]Indian Institute of Technology - Bombay, Mumbai, Maharashtra, India

Lubricant oil is used to ensure proper functioning of industrial machinery such as turbines, gears, bearings and compressors. Oil analysis is used to detect and quantify the presence of wear metals and other contaminants in the lubricant of oil wetted systems, by sensing the change in ... En savoir plus

COMSOL Simulation of Transcutaneous O₂ Transport for Accurate Personalized Respiratory Monitoring

Mohammed Almatrood¹, Bige Unluturk¹
¹Michigan State University, East Lansing, MI, USA

Accurate, real-time measurement of arterial oxygen partial pressure (PaO₂) is essential for managing respiratory diseases and critical care conditions. Traditional arterial blood sampling for PaO₂ is invasive, painful, and provides intermittent snapshots rather than continuous ... En savoir plus

Modelling Thermal Time-of-Flight Sensor for Flow Velocity Measurement

O. Ecin[1], E. Engelien[2], M. Malek[2], R. Viga[2], B. Hosticka[1], and A. Grabmaier[2]

[1]Institut of Mikroelektronische Systeme, University Duisburg-Essen, Duisburg, Germany
[2]Institut of Elektronische Bauelemente und Schaltungen, University Duisburg-Essen, Duisburg, Germany

This communication reports on a numeric fluid dynamics simulation on a pipe flow model. The basic background is to determine the velocity of a flowing fluid in a pipe by using the Thermal Time-Of-Flight (TTOF) method on water. The visualization of the temperature and velocity ... En savoir plus

Use of COMSOL Multiphysics for Automated Electrostatic MEMS Sensor Design

J.C. Blecke, and G.G. Parker
Michigan Technological University, Houghton, MI, USA

An automated design tool using COMSOL Multiphysics 3.5a and a genetic algorithm was developed to improve the performance of a MEMS resonant mass sensor. The device was comprised of a fixed-free poly-silicon micro-cantilever beam with electrostatic actuation and capacitive sensing. The ... En savoir plus

Modelling of a Differential Sensor in Eddy Current Non-destructive Evaluation

A. Rosell[1], and G. Persson[2]
[1]Volvo Aero Corporation, Trollhättan, Sweden
[2]Chalmers University of Technology, Göteborg, Sweden

Interaction between the probe and a defect in eddy current non-destructive evaluation is studied. Evaluation of sensor signal response is the basis for the calculation. In this work a differential sensor is considered and the problem regarded here is problem 8 from the testing of ... En savoir plus

Simulation of MEMS based Flexible Flow Sensor for Biomedical Application

D. Maji[1], C. P. Ravikumar[2], and S. Das[1]
[1]School of Medical Science and Technology, Indian Institute of Technology, Kharagpur, West Bengal, India
[2]Texas Instruments (India) Pvt. Ltd., Bangalore, India

Arterial disease, especially Coronary Artery Disease (CAD) is one of the leading causes of premature morbidity and mortality. During the flow, blood interacts with vessel wall mechanically and chemically which modulates the plaque formation in blood vessel leading to coronary artery ... En savoir plus

Premier

111–120 of 694

Dernier