Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Simulating Transport and Adsorption of Organic Contaminants in 3D Porous Activated Carbon Block Media

J. Kim[1], A. Morgott[2], Z. Wu[2], L. Hopaluk[2], M. Miles[2], W. Stoner[2], Q. Li[1]
[1]Rice University, USA
[2]Access Business Group, USA

Granular and powdered activated carbons have been widely used for purification/filtration in air and water as catalysts or organic adsorbents. To obtain mechanical filtration capacity and inorganic reduction performance, activated carbon can be formed as a block-shaped porous media, ... En savoir plus

Plasma Edge Simulations by Finite Elements using COMSOL

C. Hollenstein, and A. Howling
Ecole Polytechnique Fédérale de Lausanne, Switzerland

Finite elements using COMSOL Multiphysics have been used to simulate the edge plasma in a large area capacitively coupled RF reactor. In order to reduce numerical difficulties simplified reactor edge geometries have been used. First results show the importance of electrostatic double ... En savoir plus

Analysis of an Electromagnet for Diverse Safety Rod Drive Mechanism

N. Subbulu[1], P. Sharma[1], V. Sharma[1], S.K. Das[1], R. Veerasamy[1], B. Krishnakumar[1], P. Kalyanasundaram[1], and G. Vaidyanathan[1]
[1] Fast Reactor Technology Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamil Nadu, India

Prototype Fast Breeder Reactor (PFBR) has two independent, diverse, fast acting & fail safe shut down systems to achieve the required level of safety & reliability (1). The shut down systems comprises of nine numbers of Control & Safety Rod Drive Mechanisms (CSRDM) & ... En savoir plus

Pseudo 3-D Simulation of a Falling Film Microreactor

M. Al-Rawashdeh[1,2], V. Hessel[1,2], P. Löb[1], and F. Schönfeld[1]
[1]Institut für Mikrotechnik Mainz GmbH, Mainz, Germany
[2]Department of Chemical Engineering and
Chemistry, Eindhoven University of Technology, Eindhoven, Netherlands

Gas-liquid falling film microreactors carry out fast exothermic and mass transfer limited reactions. Since the major rate limiting steps occur on the liquid side, it is important to account for a realistic liquid film profile within the reactor simulation. Based on realistic channel ... En savoir plus

COMSOL Multiphysics® Model for Optimizing Regeneration of CFP Catalyst in Packed-Bed Reactors

B. Adkins[1], J. Parks II[1], K. Iisa[2], K. Smith[2]
[1]Oak Ridge National Laboratory, USA
[2]National Renewable Energy Laboratory, USA

The DOE BETO consortium "ChemCatBio" has developed a packed bed catalyst for use in a Catalytic Fast Pyrolysis (CFP) process for producing biofuels and chemicals from lignocellulosic biomass. Another BETO consortium known as "CCPC" (Consortium for Computational Physics and Chemistry) is ... En savoir plus

Optimization of Flow Distribution in the Feed Sparger of a Steam Drum

P. Goyal[1], A. Dutta[1], and A. K. Ghosh[1]
[1] Reactor Safety Division, Bhabha Atomic Research Centre, Trombay, Mumbai, Maharashtra, India

Steam drums of a nuclear power plant separate steam from the steam water mixture and sub cooled incoming feed water returns to the reactor. The entire feed water flow is delivered to the steam drum through the feed water sparger. The feed water sparger is provided with number of ... En savoir plus

Simulation of Surface Chemical Reactions in a Monolith Channel for Hydrogen Production

N. Pacheco[1], D. Pavone[1], K. Surla[1], J. Houzelot[2], and E. Schaer[2]
[1]IFP-Lyon, Solaize, France
[2]ENSIC, Solaize, France

This paper intends to show a model of a monolithic reactor for the autothermal reforming process (ATR), a process that uses hydrocarbons to produce H2. The ATR chemical reactions take place on the surface of monolith channels coated with a catalyst. The isothermal ATR reactor is modeled ... En savoir plus

Simulation as Various Operating Condition for High Temperature Magnesium Hydride Reactors

D.Y. Shin, T.E. Kim, J.Y. Lee
Altsoft Inc., Seoul, South Korea

Magnesium hydride (MgH2) has been one of the most promising hydrogen storage methods that can be applied to commercial hydrogen energy systems due to magnesium’s safety, low cost, and excellent storage capacity for hydrogen, compared to other reversible metal hydrides. But hydrogen ... En savoir plus

Beyond the limits of mass transfer: How pillar electrodes influence electrochemical reactors

Michiel De rop¹, Jonas Hereijgers¹, Tom Breugelmans¹
¹University of Antwerp, Antwerp, Belgium

Electrochemistry is inherent a surface process, requiring the transport of reagents towards the electrode surface. In electrochemical reactors this typically results in mass transfer limitation problems, limiting the yield and efficiency of the reactor. While the academic community is ... En savoir plus

Top-blown rotary converter preheating and charge heating with an oxy-fuel burner

Sergey Semenov¹, Patrick Namy¹, Aditya Kale², Sello Tsebe²
¹SIMTEC, Grenoble, France
²MINTEK, Randburg, South Africa

Present work is done in the framework of the SisAl Pilot EU project, which aims at optimising the silicon production in Europe by recycling materials and using a carbon-emission friendly technology. The silicon production experiments are conducted on laboratory and pilot scales in ... En savoir plus

Premier

141–150 of 449

Dernier