Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Toutes

Boston 2025

Terme recherché:

transducer

Design and Simulation of a MEMS Directional Acoustic Sensor

S. L. Pinjare [1], V. S. Nagaraja [1], K. S. Rudresh [1],
[1] Department of ECE , Nitte Meenakshi Institute of technology, Bangalore, Karnataka, India

A Piezoelectric Directional Microphone is demonstrated based on a bio-mimetic design inspired by the parasitoid fly Ormia ochracea using the PiezoMUMPs multi-user foundry. The device simulation was conducted using COMSOL Multiphysics® software which achieves a directional sound field ... En savoir plus

Single-Phase Modeling in Microchannel with Piranha Pin Fin

X. Yu [1], C. Woodcock [1], Y. Peles [2], J. Plawsky [1],
[1] Rensselaer Polytechnic Institute, Troy, NY, USA
[2] University of Central Florida, Orlando, FL, USA

Microchannel has shown potential to dissipate high heat flux in past years [1][2]. At the same time, liquid cooling attracts more and more attention from researchers for its favorable thermal properties and ability to cool down hot and keep acceptable system temperature [3][4][5]. This ... En savoir plus

Sensitivity Analysis of Different Models of Piezoresistive Micro Pressure Sensors

S. Meenatchisundaram[1], S. M. Kulkarni[2], S. Bhat
[1]Department of Instrumentation and Control Engineering, Manipal Institute of Technology, Manipal, Karnataka, India.
[2]Department of Mechanical Engineering, National Institute of Technology, Surathkal, Karnataka, India.

Piezoresistive pressure sensors have received much attention over the years because of low cost, simple measurement techniques, etc. There is a challenge in design with respect to appropriate positioning, shape and temperature compensation. Different models of piezoresistive pressure ... En savoir plus

Design and Simulation of MEMS based PZT energy generator.

A. Deshpande[1]
[1]B.V.Bhoomaraddi College of Engineerring & Technology, Hubli, Karnataka, India

At present, a great deal of research effort has been directed to find eco-friendly and renewable sources of energy. With the rising costs of crude oil and petroleum, along with the derogatory effects that they pose to the environment, this sort of approach is of utmost importance. This ... En savoir plus

Determination and Verification of the Forchheimer Coefficients for Ceramic Foam Filters using COMSOL CFD Modeling

M.W. Kennedy[1], K. Zhang[1], J.A. Bakken[1], R.E. Aune[1]
[1]Norwegian University of Science and Technology, Trondheim, Norway

Experiments have been conducted with water at velocities from ~0.015-0.77 m/s to determine the permeability of 50 mm thick commercially available 30, 40, 50 and 80 Pores Per Inch (PPI) Ceramic Foam Filters (CFF) used for liquid metal filtration. Measurements were made using two different ... En savoir plus

Finite Element Model for Simulating the Inspection of Steel Tubes Using Electromagnetic Acoustic Transducers

P. Sun[1], X. Ding[1], X. Wu[1], M. Cong[1]
[1]School of Mechanical Science & Engineering, Huazhong University of Science and Technology, Wuhan, China

Steel tubes are widely used in industries. In order to ensure the safety and reliability of industrial processes, electromagnetic acoustic transducers (EMATs) based guided wave technology has been developed for inspecting stainless steel tubes regularly. Theoretical models and finite ... En savoir plus

3D Multiphysics Model of Thermal Flow Sensors

C. Falco[1], A. De Luca[1], S. Sarfraz[1], F. Udrea[1]
[1]University of Cambridge, Cambridge, UK

The aim of this work is to present a model capable to describe the behaviour of a thermal flow sensor under every physical aspect. A generic thermal flow sensor relates the flow properties with a variation in the temperature profile inside the device itself. Thus, it is locally heated ... En savoir plus

Simulation of ZnO Enhanced SAW Gas Sensor

H. du Plessis[1], W. Perold[1]
[1]University of Stellenbosch, Stellenbosch, South Africa

Surface acoustic wave (SAW) devices are widely used for their sensing capabilities and gas sensing is only one of many uses. There is an ever increasing need to make them as effective as possible by adding nanomaterials to the device. In this study a two-port delay-line structure with ... En savoir plus

Design and Multiphysics Analysis of MEMS Capacitive Microphone

N. J. Krishnapriya[1], M. R. Baiju[1]
[1]College of Engineering, Trivandrum, Kerala, India

In this paper, design and analysis of a novel MEMS capacitive microphone which uses corrugations and perforations in diaphragm is presented. The corrugation and perforation in diaphragm reduces the residual stress and increases the mechanical sensitivity of diaphragm. Instead of the ... En savoir plus

动电阻抗成像方法仿真研究

李士强 [1], 刘国强 [1], 李晓南 [1],
[1] 中国科学院电工研究所

电阻抗成像（EIT）技术由于分辨率较低受到专家学者的诟病，而EIT与超声技术两者的结合以及 EIT 与磁共振技术两者的结合可以提高成像的分辨率，但仍分别存在电极射频屏蔽效应以及分辨率难以进一步提高等问题。本文将磁共振成像技术和磁声电技术优势互补，采用低频振动进行激励，提出了一种新的动电成像方法，并采用 COMSOL 软件建立了二维仿真模型，使用 PDE 模式对动电阻抗成像的正问题进行了仿真研究，利用 COMSOL 的仿真结果结合Matlab软件进行了反演，实验结果可以反映出仿真模型内部的电导率分布，能够解决上述电阻抗成像结合技术存在的问题。 En savoir plus

Premier

181–190 of 248

Dernier