- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Environmental factors such as temperature and humidity can significantly affect the quality of the metal powder used in power bed fusion additive manufacturing, leading to variations in the integrity of finished components. It is therefore important to monitor and minimize the exposure ... En savoir plus
In this work, a methodology is developed, based on the application of finite element method in the frequency domain, using the COMSOL Multiphyics software, aiming the sensibility analysis of inductance calculation involving some configurations of an E-core magnetic circuit. Such ... En savoir plus
Passing alternating current through a wire placed just above a conducting surface induces eddy currents in that surface. Any cracks present in the conductor modify the eddy current distribution, creating a magnetic field signature unique to the crack. This magnetic signature can be ... En savoir plus
Numerous sensors based on various sensing principles are used to measure pressures and temperatures in wellbores. Of all these sensors, piezoelectric quartz is the most preferred means of sensing pressure and temperature and is probably the only sensor to meet stringent downhole ... En savoir plus
In this research, we performed multiple COMSOL Multiphysics® simulations. We analyzed the dispersion curves of waves in a LAMB wave pressure sensor; simulated a thin metal film in a microbolometer and observed the resulting stress; investigated the thermal behavior of an acoustic wave ... En savoir plus
Here we optimize the geometry: proof mass length Lm to total length L, thickness of the piezoelectric material (Tp) to total cantilever thickness (T) for obtaining the maximum stress distribution (Smax), output voltage (Vout) and power performance (Pout) of the unimorph Cantilever beam ... En savoir plus
This paper reports the simulation of micro-electro-mechanical system (MEMS) cleanroom for the purpose of determining the effect of particulate contaminants on the static stress response of cantilever type MEMS devices, such as high precision MEMS pressure sensor. The contaminant presence ... En savoir plus
The Large Hadron Collider at CERN has begun operations at 7 TeV center of mass energy. CERN plans to run at this energy until the end of 2012 with the goal of providing an integrated luminosity of a few fb?¹ to the CMS and ATLAS experiments. The LHC will then shut down for 1.5 to 2 years ... En savoir plus
Load cells are force sensors, which are used in weighing equipment. The objective of this work is to develop MEMS based load cell. In this work two different load cell designs were simulated. First design is based on compressing a meander like polysilicon strain gage for the measurement ... En savoir plus
Offshore operations, using Robotically Operated Vehicles (ROVs) in areas with high ambient temperatures require ampacity limitations to be established. Specifically, the risk of overheating ROV umbilicals and tethers when running at high power, due to multiple layers on winch drums is a ... En savoir plus