Articles techniques et présentations

The tunable capacitor (variable capacitor) is one of the most important and components in filters, Phase shifters, VCO etc. A tunable capacitor can also be built using electro – thermal actuating mechanism. Compared to electro static, tunable capacitors actuated by thermal actuators ... En savoir plus

In this paper simulation and parametric study of a PDMS valveless micropump using Fluid-Structure Interaction (FSI) appraoch is presented. The simulation for the valveless micropump were carried out in COMSOL Multiphysics software. In case of a valveless micropump diffuser/nozzle element ... En savoir plus

We calculate the maximum force acting on the mirror and found it to be 0.54 µN at 700 V. The force magnitude can be improved by increasing voltage and diminishing the separation between plates. The force along X, Y-axis acts towards the center of the plates and in Z direction towards the ... En savoir plus

In this paper, design and analysis of a novel MEMS capacitive microphone which uses corrugations and perforations in diaphragm is presented. The corrugation and perforation in diaphragm reduces the residual stress and increases the mechanical sensitivity of diaphragm. Instead of the ... En savoir plus

We studied the optical phonon excitations (LO) of ordered arrays of dot/ rod core-shell CdSe/ CdS nanorods by Raman spectroscopy. Upon deposition on planar substrates the nanorods formed super-lattice structures via side-by side assembly into tracks over some microns of length. COMSOL ... En savoir plus

Since the advent of Terhertz(THz) technology, improving the THz emission power has been one of the major research goal. One of the methods to increase the THz emission power is to increase the coupling of excitation laser light to the dielectric substrate.The field of nano-plasmonics ... En savoir plus

Traditionally, municipal sewer and water agencies have relied on acoustic data loggers and closed-circuit television cameras to inspect pipes for leaks. In addition, the same legacy techniques have been used to certify new and rehabilitated pipes as watertight. Unfortunately, visually ... En savoir plus

This paper discusses the simulation studies on a vibration based energy harvesting system to convert the undesirable mechanical vibration to useful green power. The design consists of a resonating proof mass and a spring system enclosed in housing and fixed on the source of vibration. A ... En savoir plus

Anchor loss causes a reduction in the quality factor of high frequency micromechanical resonators. This study illustrates the importance of anchor design in mitigating anchor loss in high frequency resonators. The performances of two different anchor configurations for a silicon nitride ... En savoir plus

This paper projects a novel 3D capacitive accelerometer design to identify a severe accident and initiate airbag deployment systems. It will detect the rapid negative acceleration of the vehicle to avoid the severity of the collision. Such a device demands excellent performance in terms ... En savoir plus