Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

In-Situ Detection of Inclusions in Liquid Steel

X. Wang, R. Guthrie, and M. Isac
McGill Metals Processing Centre, Montreal, Canada.

A numerical multiphase flow model is proposed to predict the behavior and motion of entrained inclusions in liquid steel, as they enter the orifice of a LiMCA (Liquid Metal Cleanliness Analyzer) sensor for assuring steel quality. The method of measurement is based on the electric sensing ... En savoir plus

Numerical Characterization of Magnetostrictive Response of GalFeNol Samples for Energy Harvesting

G. Canciello [1], A. Cavallo [1], C. D'Avino [2], D. Tornese [2], C. Visone [3]
[1] Dipartimento di Ingegneria Industriale e dell’Informazione, Seconda Università degli Studi di Napoli, Caserta CE, Italy
[2] Teoresi Group S.p.A, Torino, Italy
[3] Dipartimento di Ingegneria, Università del Sannio, Benevento BN, Italy

GalFeNol is a new Giant Magnetostrictive Material that can be used in energy harvesting especially in vibration reduction applications, thanks to the Joule and Villari effects. A 3D-model of GalFeNol rod is stressed by a time varying longitudinal force of 1000 N. The study has been ... En savoir plus

Multiphysics Simulation of the Effect of Sensing and Spacer Layers on SAW Velocity

P. Zheng[1,4], D.W. Greve[2,4], and I.J. Oppenheim[3,4]

[1]Department of Physics, Carnegie Mellon University, Pittsburgh, Pennsylvania, USA
[2]Department of Electrical and Computer Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania, USA
[3]Department of Civil and Environmental Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania, USA
[4]National Energy Technology Laboratory, Pittsburgh, Pennsylvania, USA

Surface acoustic wave gas sensors use a chemically sensitive resistive layer to detect gas concentration. The resistivity of the sensing material, the sensing layer thickness, and the spacer layer thickness all affect the surface wave propagation velocity. Existing analytic theory ... En savoir plus

Development of a RheoDSC, an Instrument for Simultaneous Rheological and Calorimetric Measurements

L. Van Lokeren [1], R. Verhelle [1], C. Block [1], P. Van Puyvelde [2], G. Van Assche [1]
[1] Vrije Universiteit Brussel, Brussels, Belgium
[2] Catholic University of Leuven, Leuven, Belgium

Transformations in polymers, such as polymerisation, melting/crystallization, and phase separation/remixing, are associated with changes in both rheological and thermal properties. To permit simultaneous calorimetric and rheometric measurements, the RheoDSC was developed. The RheoDSC ... En savoir plus

Carbon Steel Pipeline Wall Thickness Measurement Using Pulsed Eddy Current Technique

S. Roy[1], S. K. Pradhan[1], T. V. Shyam[2], B. S. V. G. Sharma[2],
[1] Atomic Energy Regulatory Board, Mumbai, Maharashtra, India
[2] Bhabha Atomic Research Centre, Mumbai, Maharashtra, India

Carbon Steel pipes are used as feeder pipes in Pressurized Heavy Water Nuclear Reactors for carrying the coolant from the inlet headers to the coolant channel and again from outlet of the coolant channel to the outlet headers and are part of the Primary Heat Transport (PHT) System of ... En savoir plus

Design, Simulation, and Fabrication of Thermal Angular Accelerometers

H. Alrowais [1],
[1] School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA

This abstract introduces a sensor design for detecting angular acceleration in a single plane using thermal convection. The working principal of the device is based on probing temperature profile changes along a micro-torus caused by angular acceleration. By properly choosing the ... En savoir plus

Flow and Mixing in the Liquid between Bubbles

B. Finlayson[1]
[1]Department of Chemical Engineering, University of Washington, Seattle, Washington, USA

Mixing is characterized in liquids moving between bubbles when the bubbles are moving down a microfluidic channel. The shape is assumed based on fluid mechanical arguments and experimental observations, and the mixing is characterized for a variety of situations in two and three ... En savoir plus

Mixing of Liquids in Microfluidic Devices

B. Finlayson, A. Aditya, V. Brasher, L. Dahl, H. Dinh, A. Field, J. Flynn, C. Jenssen, D. Kress, F. Ninh, A. Nordmeier, H. Song, and C. Yuen

University of Washington, Seattle, WA, USA

The mixing of liquids was characterized in thirteen different microfluidic devices. The goal was to characterize, in a uniform manner, the flow and mixing that occurred in slow, laminar flow and to present the results that allow quick designs. The mixing of a dilute chemical in another ... En savoir plus

Detection of Magnetic Particles by Magnetoresistive Sensors

A. Weddemann[1], A. Auge[1], F. Wittbracht[1], C. Albon[1], and A. Hütten[1]
[1]Department of Physics, Thin Films and Physics of Nanostructures, Bielefeld University, Bielefeld, Germany

In this work, we demonstrate the implementation of the micromagnetic equations for the description of ferromagnetic thin films in COMSOL Multiphysics®. We apply our model to magnetoresistive sensors consisting of several soft ferromagnetic layers and their response to magnetic particles. ... En savoir plus

Optoelectronic Transducer with an Optical Fiber Transmission Used for Current Measurement

J. Golebiowski [1],
[1] Dept. of Semiconductor and Optoelectronics Devices, Lodz University of Technology, Lodz, Poland

The transducer's construction used for current measurement in medium voltage power lines for current values kA is shown. The transducer involves magnetic circuit with a gap in which a MEMS structure with a movable cantilever is placed. The beam is made of silicon with a NiFe layer. The ... En savoir plus

Premier

21–30 of 129

Dernier