- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Transmission-line transducers are used for the measurement of absorption and reflection of different materials, such as: liquids, granular medium, and ground. A simplified methodology for calculation of scattering parameters of such transducers is presented. The transducer cell is ... En savoir plus
Acoustic Resonance (Acu-Res®) Technology [1] is at the core of FT wind sensors, operating by measuring phase shifts between a pair of transducers caused by fluid flow within an acoustic resonator. Three piezoelectric transducers are placed in a triangular formation on the top reflector ... En savoir plus
This work describes the design methodology and development of piezoelectric transducers for applications in fluids with COMSOL_Multiphysics. In these linear models for the acoustic-structure interaction approximate numerical solutions have been obtained. In order to perform the ... En savoir plus
The technology involved in high performance ultrasound imaging probes needs a reliable model to help in new projects development and performance simulations. To achieve a useful model, it is necessary to use correct values for all material parameters involved in the electro-acoustical ... En savoir plus
Synthetic jet actuators enhance flow control by generating pulsatile jets with zero net mass flux. There is a need to develop a computationally inexpensive model that can generate optimal geometric actuator designs of maximum jet performance. This work investigates the multi-physics ... En savoir plus
This paper describes the COMSOL Multiphysics® simulation and the test of a low-frequency (500Hz) sound source for long-range acoustic communications. This design uses innovative carbon-fiber composite materials.To meet the demand for the frequency range the doubly resonant organ pipe ... En savoir plus
Electret condenser microphones are one of the most used transducers for a variety of applications. The engineer designing these cartridges must take into consideration many factors to create a design that meets its specifications. Most parts of the design have multiple constraints across ... En savoir plus
A COMSOL Multiphysics® model was made to design a mechanical amplifier and radiation plate for the emission of high intensity 40.5 kHz ultrasound to air by means of a Langevin type transducer usually applied in cleaning baths for example. In this work, ultrasonic irradiation is aimed at ... En savoir plus
The mechanical simulation and analysis of the cantilever-to-anchor configuration for an out-of-plane structure used in transducer applications is reported. The polymer-based Buckled Cantilever Plate “BCP” structure, gives the ability to orient an active device from a horizontal to a ... En savoir plus
MEMS(Microelectromechanical systems) based energy harvesting is process of extracting energy from natural resources in small amounts. Here, number of (millions) small energy harvesting modules lead to substancial energy. In this design, a piezoelectric material is used to scavenge ... En savoir plus
