- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
There are several industrial applications, like food dehydration, atomization and textile washing among others, that are enhanced by the use of power ultrasonic transducers with flat rectangular plate radiator. These transducers are composed by three main parts, the piezoelectric ... En savoir plus
We simulate a Capacitive Micromachined Ultrasound Transducer (CMUT) using COMSOL Multiphysics® software. The CMUT is an electromechanical system, therefore, we couple the physics of electrical and structural mechanics to describe its dynamics. We obtain the distributions of the electric ... En savoir plus
Ultrasonic nondestructive testing (NDT) is extensively used in fields like medicine, oil and gas, and aerospace to inspect materials without causing damage. However, developing experimental setups and prototypes can be costly and time-consuming. This study employs advanced computational ... En savoir plus
In this paper, we develop and analyze a standard piezoacoustic Tonpilz-transducer model for underwater acoustics in Comsol by addressing the attendant piezoelectric and pressure acoustic multiphysics phenomena. Transducer properties that are studied and characterized are the center ... En savoir plus
Nondestructive inspection (NDI) of damages (e.g., imperfect or degraded bonding lines) or the remaining strength of adhesively bonded lap joints is critical for the operational safety of aircrafts and vehicles. It remains a challenge to use the conventional NDI to quantitatively infer ... En savoir plus
The transducer's construction used for current measurement in medium voltage power lines for current values kA is shown. The transducer involves magnetic circuit with a gap in which a MEMS structure with a movable cantilever is placed. The beam is made of silicon with a NiFe layer. The ... En savoir plus
Synthetic jet actuators enhance flow control by generating pulsatile jets with zero net mass flux. There is a need to develop a computationally inexpensive model that can generate optimal geometric actuator designs of maximum jet performance. This work investigates the multi-physics ... En savoir plus
The objective of the research is to design a broadband energy harvester device through the two-piece non-linear trapezoidal geometry approach. The performance of two piezoelectric PZT-PZN polycrystalline ceramic composition samples are simulated in the COMSOL Multiphysics® software, and ... En savoir plus
In order to transmit energy in one direction, sonar flextensional transducers are combined into arrays of elements that are spaced a 1/4 wavelength apart. The directionality (front-to-back pressure ratio) is a modest of 6 dB. A single projector that is 1/3 wavelength in size and capable ... En savoir plus
As the ultrasonic sensor industry evolves towards lower costs, miniaturization, higher integration, and superior performance, Microelectromechanical Systems (MEMS)-based ultrasonic transducers have emerged as a prominent trend. This article introduces a Piezoelectric Micromachined ... En savoir plus