- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Chemicals are an integrated part of our daily life. While chemicals are significant contributor to a nation’s economy, sound management of chemical production is essential for environmentally friendly operation without maximizing operational costs. Next generation technologies must be ... En savoir plus
This paper will present a numerical model based on COMSOL Multiphysics suited to simulate the dynamic response of a catenary mooring (or a submarine cable). In general, mooring lines are subject to a direct wave load (e.g. drag, inertia) in addition to the movement of the vessel to ... En savoir plus
The present study relates to the reduction of the amount of air to gas leakage in a typical rotary regenerative air preheater of coal-fired steam generators, by means of computational thermo-fluid-dynamics. Due to the gaps, or clearances, required for rotation, there is a significant ... En savoir plus
In this work a miniaturized fuel cell design based on microchannels, into which the liquid fuel and oxidizer streams are fed through T shaped connectors, is optimized for improved fuel usage. This particular design exploits the laminar nature of the fluid flow at small Reynolds numbers ... En savoir plus
The production of hydrogen from renewable energy surplus is seen as a key strategy for energy storage. Centro Nacional del Hidrógeno works actively in this direction by considering a strategic line in order to achieve a sustainable energy future. Alkaline electrolysis is the main ... En savoir plus
In oil and gas industries, electrical heaters are often used to control the internal pipe temperature. One important criterion for such test, is to maintain a uniform temperature range during the test. The objective of this study was to evaluate the heat transfer of one design of the ... En savoir plus
A microfluidic thermal cycler for Polymerase Chain Reaction (PCR) has been modeled. A microliter sample is driven along the microchannel by a flow generated by means of electroosmotic micropumps, activated in sequence. Several multichannel pumps configurations have been separately ... En savoir plus
A non-newtonian oil dispersion in a pulsed flow pipe system was mixed in a circulation loop pipe with custom-made static mixers. The rotor-pump was used in a non-pulsed flow circulation, and diaphragm pump for pulsed flow circulation. Modeling was done using COMSOL Multiphysics® 4.3b. ... En savoir plus
Multiphase flow in a microreactor was studied numerically for two immiscible liquids. Validation of the model was sought by simulating the flow behavior and mass transfer characteristics of a neutralization reaction described in the literature. Contact angles, interfacial tension and the ... En savoir plus
The research documented herein was funded by a research contract between the Research Reactors Division (RRD) of Oak Ridge National Laboratory (ORNL) and the University of Tennessee, Knoxville (UTK) Mechanical, Aerospace and Biomedical Engineering Department (MABE). The research was ... En savoir plus