Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Transient Simulation of the Electrolyte Flow in a Closed Device for Precise Electrochemical Machining

M. Hackert-Oschätzchen[1], M. Penzel[1], M. Kowalick[1], G. Meichsner[2], A. Schubert[1,2]
[1]Professorship Micromanufacturing Technology, Technische Universität Chemnitz, Chemnitz, Germany
[2]Fraunhofer Institute for Machine Tools and Forming Technology, Chemnitz, Germany

Precise electrochemical machining (PEM) is an innovative machining technology which results from further development of the electrochemical sinking. PEM works with pulsed low frequency direct current and oscillation of the tool electrode. As part of the project ‘Electrochemical machining ... En savoir plus

Solid Oxide Fuel Cell Material Structure Grading in the Direction Normal to the Electrode/Electrolyte Interface Using COMSOL Multiphysics®

M. Andersson[1], B. Sundén[1]
[1]Department of Energy Sciences, Lund University, Lund, Sweden

Fuel cells (FCs) are promising as an energy producing device, which at this stage of development will require extensive analysis and benefit from numerical modeling at different time- and length scales. COMSOL Multiphysics® is used to describe an intermediate temperature solid oxide fuel ... En savoir plus

Transient Simulation of an Electrochemical Machining Process for Stamping and Extrusion Dies

M. Penzel [1], M. Hackert-Oschätzchen [2], M. Kreißig [1], M. Kowalick [1], M. Zinecker [1], A. Schubert [1], G. Meichsner [3],
[1] Professorship Micromanufacturing Technology, Technische Universität Chemnitz, Chemnitz, Germany
[2] Professorship Micromanufacturing Technology, Technische Universität Chemnitz, Chemnitz, Germany; Fraunhofer Institute for Machine Tools and Forming Technology, Chemnitz, Germany
[3] Fraunhofer Institute for Machine Tools and Forming Technology, Chemnitz, Germany

Precise electrochemical machining (PEM) is a non-conventional machining technology, based on anodic dissolution of metallic work-pieces. In this study an additional extension of the precise electrochemical machining with a precise angle-controlled cylinder positioning is aimed. Due to ... En savoir plus

Modeling the Acoustic Scattering from Objects Buried in Porous Sediment Using COMSOL Multiphysics® Software

A. Bonomo [1], M. Isakson [1],
[1] Applied Research Laboratories, The University of Texas at Austin, Austin, TX, USA

A frequency-domain finite element (FE) technique for computing the acoustic scattering from axially symmetric fluid-loaded structures subject to a nonsymmetric forcing field based on Ref. 1 is extended to poroelastic media and implemented in COMSOL Multiphysics® software. This method ... En savoir plus

Evaluation of the Shutdown Time of Subsea Pipeline for Oil Transportation

D. Maciel[1], N. Bouchonneau[1]
[1]Universidade Federal de Pernambuco, Recife, Pernambuco, Brazil

The maintenance plan or rush-to-repair of a subsea pipeline for oil transport may result in the shutdown of the line, in other words, may stop the flow of fluid. During the shutdown, the temperature of the oil tends to decrease continuously, and the heavy molecules tend to crystallize ... En savoir plus

Reynolds Number and Geometry Configuration Effect on Secondary Flows in S-Shaped Circular Bends

O. Ayala [1], M. F. Degenring Oliveira [2], P. Loures [2],
[1] Department of Engineering Technology, Old Dominion University, Norfolk, VA, USA
[2] Brazil Scientific Mobility Program, CAPES, Brasilia DF, Brazil

Reynolds Numbers effect: In the first bend, the higher the Reynolds number, the longer the first pair of vorticities stays attached to the wall. In the second bend, the higher Reynolds Numbers, the secondary flow from the first bend dominates. Curvature Radius effect: The smaller the ... En savoir plus

A Computational Acoustic Interrogation of Damage to Wind Turbine Blades

R. Canturk [1], M. Inalpolat [1],
[1] University of Massachusetts - Lowell, Lowell, MA, USA

Modern wind turbine blades consist of composite airfoil shaped structures that form a hollow acoustic cavity. Because of continually varying aerodynamic forces, gravitational loads, lightning strikes, and weather conditions, all blades will experience leading and trailing edge splits, ... En savoir plus

Simulation of Yield-Stress Fluid in a Rotational Rheometer: The Effect of Vane Geometry on the Accuracy of Measured Properties

J. Park [1], A. M. Oliva [1], N. R. Hargrave [1], D. Feys [2],
[1] Department of Chemical and Biochemical Engineering, Missouri University of Science & Technology, Rolla, MO, USA
[2] Department of Civil, Architectural & Environmental Engineering, Missouri University of Science & Technology, Rolla, MO, USA

A rotational rheometer for Self-Consolidating Concrete was simulated as a yield-stress fluid in a 2D geometry. The effect of the vane geometry was investigated by comparing the analytical solutions with the numerical output for flow in the coaxial cylinders. This effect was studied by ... En savoir plus

Multiphysics Simulation of 2nd Generation 238Pu Production Designs Using the COMSOL Multiphysics® software

C. J. Hurt [1], J. D. Freels [1], A. Elzawawy [2],
[1] Research Reactors Division, Oak Ridge National Laboratory, Oak Ridge, TN, USA
[2] Vaughn College of Aeronautics and Technology, East Elmhurst, NY, USA

In order to qualify experiments for in-vessel irradiation at the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory, safety assessments need to be completed and documented to ensure adequate target cooling and structural integrity. Previously, finite element analysis ... En savoir plus

Flow Focusing Droplet Generation Using Linear Vibration

A. Salari[1], C. Dalton[1]
[1]Department of Electrical & Computer Engineering, University of Calgary, Calgary, AB, Canada

Flow focusing microchannels are widely used in droplet generation mechanisms. In this paper, the effect of linear vibration on the flow pattern in a flow focusing structure and the corresponding formed droplets were numerically investigated using COMSOL Multiphysics® software. The ... En savoir plus

Premier

471–480 of 930

Dernier