Articles techniques et présentations

PEM fuel cells are very promising for portable applications. A key component of fuel cell is the flow field plate through which hydrogen will reach the anode, oxygen will reach the cathode and electron collection. Flow field plate made of silicon is not a good electrical conductor , so ... En savoir plus

On the surface of an optical waveguide, there is an evanescent field. The evanescent field decays fast and this steep gradient can be used to pull nano- and microparticles down towards the waveguide surface. Radiation forces will propel the particle forward along the waveguide. Trapping ... En savoir plus

COMSOL Multiphysics® has proven to be an invaluable “virtual laboratory” tool in assisting our development of a new generation of efficient analytical models describing the acoustics of highly porous fibre and foam materials. From the definition of the physical relations describing the ... En savoir plus

The heat transfer rate and borehole design represent great challenges to thermal equipment designer of the ground-coupled heat pump. The present model represents a mathematical numerical technique implemented to tackle such problem. A thermal assessment was established to estimate the ... En savoir plus

Microfluidics is a multidisciplinary field, basically it designs systems to handle small volumes of fluids. Most applications require a pumping action in order to move the fluid trough the system. For most of them a micro scale active pump is highly desirable. A piezoelectric micropump ... En savoir plus

One of the most important criteria for evaluating chemical enhanced oil recovery (EOR) processes that use polymers is its rheological behaviour which in turn account for other physical effects of adsorption and resistance factors during polymer-rock interactions. However, complete ... En savoir plus

Introduction In this study, we investigate the damping mechanisms of particle resonances in acoustofluidic systems using the finite element framework of COMSOLTM. In the field of acoustic micro-manipulation, pressure waves are used for the contactless handling of micro-meter sized ... En savoir plus

Cake batters are complex fat-in-water emulsions with four bulk phases (aqueous, fat, gas, and solid starch granules). The process of cake baking is very complex since a change in thermo-physical properties of batter take place during this process. The aim of this project is to develop an ... En savoir plus

In this work we tackle a more theoretical aspect of micro-injection molding, to better understand physics during the process, through numerical simulations of cavity filling. We developed a two phase flow approach by the use of COMSOL Multiphysics®. In a first step, a Level Set model is ... En savoir plus

Ion-selective membranes can be used in lab-on-a-chip devices for various portable applications in this field. These devices can be used as concentrators for analytical chemistry and for micro-scale filtration. Here, a binary aqueous electrolyte solution in a microchannel has a potential ... En savoir plus