Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Microfluidic Systems for Cell Growth and Cell Migration Studies

M.Dimaki[1], P. Shah[1], D. Kwasny[1], J. Lange Moresco[2], and W. E. Svendsen[1]
[1]Department of Micro- and Nanotechnology, Technical University of Denmark, Lyngby, Denmark
[2]Sunstone Capital, Copenhagen, Denmark

Lab-on-a-chip devices for cell culturing are becoming imperative in order to satisfy the needs for point-of-care or decentralized laboratory testing. Towards that goal we have developed miniaturized membrane based cell culture chambers for use within the field of chromosome analysis. The ... En savoir plus

A Magnetohydrodynamic Study of a Inductive MHD Generator

A. Montisci[1] and R. Pintus[1]

[1]Department of Electrical and Electronic Engineering, University of Cagliari, Cagliari, Italy

The aim of the proposed device is to overcome the typical drawbacks of MHD generators, such as the needed of a very high external magnetic field, the strong dependency of the efficiency by the temperature of the fluid, and the deterioration of the electrodes that are in contact with the ... En savoir plus

Design and Simulation of Electroactive Polymer-Based Artificial Muscles for Biomedical Application

A. S. Tripathi [1], B. P. Chatterjee [2], S. Das [3],
[1] Advanced Technology Development Centre, Indian Institute of Technology Kharagpur, Kharagpur, India
[2] Dept. of Cardiology, Medical College and Hospital, Kolkata, India
[3] School of Medical Science and Technology, Indian Institute of Technology Kharagpur, Kharagpur, India

Electro-active polymer (EAP) based actuators are one of the suitable contenders for use in artificial muscles based bio-medical application because of their bio compatibility and lower active actuation voltage requirement phenomenon. At present Ionic polymer metal composites (IPMC), a ... En savoir plus

Calibration of a Geothermal Energy Pile Model

R. Caulk[1], J. McCartney[2], E. Ghazanfari[1]
[1]University of Vermont, Burlington, VT, USA
[2]University of Colorado, Boulder, CO, USA

In this study, a model of in-situ geothermal energy piles was constructed using COMSOL Multiphysics® software. Geothermal energy piles serve two purposes, first to transfer building load into the subsurface, but also to extract thermal heat from surrounding soils. This is achieved using ... En savoir plus

Fluid-Thermal Analysis of an Inverter with Air Cooling

R. V. Arimilli[1], A. H. Nejad[1], K. Ekici[1]
[1]The University of Tennessee, Knoxville, TN, USA

A new simple air-cooled inverter design is numerically investigated using COMSOL Multiphysics® software. The thermal-fluid analysis is based on a three-dimensional conjugate heat transfer model in which the flow field is assumed to be laminar. A rigorous mesh convergence was performed to ... En savoir plus

Formation Of Porosities During Spot Laser Welding : Case Of Tantalum Joining

C. Touvrey
CEA Valduc, France

During the welding of tantalum with a ND: YAG pulsed laser, a deep and narrow cavity, called the keyhole, is formed. At the end of the process, surface tension forces provoke the collapse of the keyhole. For important interface deformations, gas bubbles can be trapped into the melting ... En savoir plus

Analysis of Dielectrophoretic Force by Using COMSOL

Taewoo Lee[1]
[1]Department of Biomedical Engineering, Yonsei University, Seoul, South Korea

Dielectrophoresis is a phenomenon in which a force is exerted on a dielectric particle when it is subjected to a non-uniform electric field. In this research, we analyze dielectrophoretic (DEP) force using a geometry containing two electrodes, one with SiO2 and one without, with a gap ... En savoir plus

3D Modeling and Analysis of a Mock-up Ironless Stator Design for Electrical Machines

T. Aravindakshan¹, Dr. P. Masson²
¹Florida Institute of Technology, Melbourne, FL, USA
²AML Superconductivity and Magnetics, Melbourne, FL, USA

With the evolving trend of electrification in transportation, electric machines with higher power density and higher efficiency are demanded which results in the thermal limit of the stator winding becoming more of a key constraint. The achievable current density in stator windings is ... En savoir plus

Modeling Flow of Magnetorheological Fluid through a Micro-channel

N.M. Bruno[1], C. Ciocanel[1] and A. Kipple[2]
[1]Department of Mechanical Engineering, Northern Arizona University, Flagstaff, Arizona, USA
[2]Dept. of Electrical Engineering and Computer Sciences, Northern Arizona University, Flagstaff, Arizona, USA

This paper presents the approach taken through the utilization of COMSOL Multiphysics 3.5a, to develop a model that simulates the flow of a magnetorheological (MR) fluid through a micro-channel. The model was developed as an aid in the analysis of a micropump that produces flow by means ... En savoir plus

The effect of viscosity on dynamics of Electrowetting droplet

NingWeng [1], Qinggong Wang* [1], Wei Yao* [1],
[1] Qian Xuesen Laboratory of Space Technology, China Academy of Space Technology, Beijing, China

Electrowetting (EW) has found a wide range of the potential applications including fast response displays, lab-on-a-chip microfluidic devices, and light vales. However, fundamental understanding of dynamics of EW-actuated droplet is not clear. In this work, a combined numerical approach ... En savoir plus

Premier

591–600 of 1391

Dernier