Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Pore-Level Influence of Contact Angle on Fluid Displacements in Porous Media

H. Ali Akhlaghi Amiri[1]
[1]University of Stavanger, Stavanger, Norway

Wettability affects two-phase displacements in porous media by determining the microscopic distribution of fluids in pore spaces. The impact of wettability on transport properties at macro-scales has been widely addressed in literature; however a deeper understanding of wettability ... En savoir plus

Acoustic-Structure Interaction Simulation of a Differential Phase Sensor

J. H. Lee[1]
[1]Department of Mechanical Engineering, American University of Sharjah, Sharjah, UAE

The idea of application as a hearing device based on a parasitoid fly, Ormia ochracea has been studied extensively recently. This paper addresses another possible application as an underwater directional sensor. In order to study the feasibility of the application, it is necessary to ... En savoir plus

Multiphysics Design of ESS-Bilbao Linac Accelerating Cavities Using COMSOL

J. L. Munoz, and I. Rodriguez
ESS-Bilbao
Bilbao, Spain

A proton linac drives particles using the electric field of a high power RF standing wave in a resonant cavity. The design of these cavities involve several aspects of multiphysics simulation, that have been accomplished using COMSOL. The first step consist on the geometric optimization ... En savoir plus

Modeling 2D and 3D of Hybrid Laser Nd:Yag - MIG Welding Processes

E. Le Guen[1], R. Fabbro[1], F. Coste[1], M. Carin[2], and P. Le Masson[2]
[1]LALP (CNRS)/GIP GERAILP, Arcueil, France
[2]LIMATB, Université de Bretagne Sud, Lorient, France

Hybrid laser-MIG arc welding has very interesting advantages compared to laser welding or arc welding used separately. It is known that improvement of productivity results in higher welding speeds, thicker welded materials, joint fit-up allowance, better stability of molten pool, and ... En savoir plus

Study of a Self Heating Process of Tetrafluoroethylene by the Exothermic Dimerization Reaction to Octafluorocyclobutane

M. Beckmann-Kluge[1], H. Krause[1], V. Schröder[1], A. Acikalin[2], and J. Steinbach[2]
[1]Federal Institute for Materials Research and Testing, Berlin, Germany
[2]Technical University Berlin, Berlin, Germany

The self heating process of Tetrafluoroethylene caused by an exothermic dimerization reaction was studied. The heat of reaction can lead to a thermal explosion by the decomposition of the Tetrafluoroethylene. Different reaction kinetics, including multistep kinetics, were used to ... En savoir plus

A Study of Lubricating Flows in MEMS Bearings

E. Gutierrez-Miravete[1], and J. Streeter[2]

[1]Department of Engineering and Science, Rensselaer at Hartford, Hartford, Connecticut, USA
[2]Optiwind, Torrington, Connecticut, USA

The bearing and shaft are part of a safe and arm device constructed as an assembly by a multi-layer additive/subtractive plating and planarization processes (EFAB technology). Devices are constructed by a multi-layer additive/subtractive planarization process. This paper evaluates the ... En savoir plus

High-Temperature Sodium/Metal Chloride Storage Battery

M. Vallance[1], and R. White[2]
[1]General Electric Global Research Center, Niskayuna, NY, USA
[2]Department of Chemical Engineering, University of South Carolina, Columbia, SC, USA

Sodium/metal chloride storage batteries, used in hybrid propulsion applications, provide high energy and power densities safely and reliably. To understand the dynamics of electrochemical cycling, a high-temperature sodium/ferrous chloride storage cell was modeled in two dimensions. The ... En savoir plus

Catalytic Pellet Based Heterocatalytic Reactor Bed Models Development

G. Rádi, T. Varga, and T. Chován
University of Pannonia, Veszprem, Hungary

Nowadays mathematical models are applied in almost every field of our life to predict how real systems behave. Computational Fluid Dynamics (CFD) has become a standard tool for analyzing various situations where fluid flow has a significant effect on the studied processes. Complex models ... En savoir plus

A Dynamic Electrowetting Simulation using the Level-Set Method

B. Cahill[1], A. Giannitsis[1], G. Gastrock[1], M. Min[1,2], and D. Beckmann[1]
[1]Institut für Bioprozess- und Analysenmesstechnik e.V., Heiligenstadt, Germany
[2] Department of Electronics, Tallinn University of Technology, Tallinn, Estonia

Electrowetting occurs with the electrical control of the surface wetting properties through the application of an electric potential. A simulation of electrowetting driven droplet dynamics is performed using the COMSOL Multiphysics level-set method for a sessile droplet and for a ... En savoir plus

Thermo-Hydro-Mechanical-Chemical Modelling of the Bentonite Barriers in Final Disposal of High Level Nuclear Waste

M. Olin, M. Tanhua-Tyrkkö, V. Pulkkanen, A. Itälä, K. Rasilainen, A. Seppälä, and M. Liukkonen
VTT Technical Research Centre of Finland, Nuclear Energy, Finland

The bentonite barrier is an essential part of safe nuclear waste repository in granite bedrock. In this work COMSOL Multiphysics® is applied to modeling Thermo-Hydro-Mechanical-Chemical (THMC) processes taking place in a bentonite buffer. The system is studied in different geometries, ... En savoir plus

Premier

661–670 of 1392

Dernier