Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

基于等效热模型的三维封装快速热仿真技术

唐旻 [1], 冯强强 [1], 董一琳 [1]
[1] 上海交通大学，上海，中国

近年来，三维系统级封装技术逐渐成为人们的关注焦点，是下一代集成电路封装设计最有发展潜力的实现方案。然而，热管理是系统级封装技术需解决的关键问题。图1是典型的系统级封装结构，包含堆叠芯片、硅通孔、封装基板、热界面材料以及多层凸点结构。若对该结构的所有细节进行建模，将会消耗巨大的计算资源，导致分析效率非常低下。因此，本论文将封装中的硅通孔层以及凸点层等复杂结构进行等效处理，提取它们在水平和垂直方向上的等效热导率以及等效比热容、等效密度等参数。例如，在建模过程中，采用 COMSOL Multiphysics® 传热模块对硅通孔层的水平方向等效热导率进行提取，边界设置如图2所示 ... En savoir plus

Microwave Heating Simulation of Frozen Pie

F. Chen[1], T. Gulati[1], H. Zhu[1], A. K. Datta[1]
[1]Cornell University, Ithaca, NY, USA

This research studies the thermal effect of frozen pie heating in the microwave oven. Considering as composite material, the properties of pie derived based on its composition. Here the package, susceptor’s influence to the temperature distribution is also studied. En savoir plus

Simulation of Diffuse Optical Tomography using COMSOL Multiphysics®

S. A. M. Kirmani [1] , L. Velmanickam [1], D. Nawarathna [1], S. S. Sherif [2], I. T. Lima Jr. [1],
[1] Department of Electrical and Computer Engineering, North Dakota State University, Fargo, ND, USA
[2] Department of Electrical and Computer Engineering, University of Manitoba, Winnipeg, MB, Canada

We show that COMSOL Multiphysics® software can efficiently simulate the diffusion equation (DE) in diffusive optical tomography systems. Using our implementation, we simulate a frequency domain diffusive optical tomography system two order of magnitude faster than the standard Monte ... En savoir plus

用于自由空间和光波导之间的高效率耦合器

赖耘 [1], 徐益超 [2],
[1] 中国江苏省南京市南京大学
[2] 中国江苏省苏州市苏州大学

In this work, we design a type of meta-prism which can provide high-efficiency coupling between free space and optical waveguides at infrared frequencies. The meta-prism is composed of an ABA multilayer structure with a fixed total thickness. By varying the filling ratio of the ... En savoir plus

Electrical Scale-Up of Metallurgical Processes

R. Schlanbusch[1], S. A. Halvorsen[1], S. Shinkevich[1], D. Gómez[2]
[1]Teknova, Kristiansand, Norway
[2]Department of Applied Mathematics & ITMATI, Universidade de Santiago de Compostela, La Coruña, Spain

The problem under investigation is electrical scale-up of a generic metallurgical process for primary metal production through resistive heating of slag by electric current, typically supplied by an AC three-phase system. Maxwell’s equations are analyzed revealing that the properties of ... En savoir plus

CFD Analysis of a Heat Exchanger for an Electric Machine

A. Curci [1], D. Falchi [2], G. Secondo [1],
[1] ABB S.p.A. Italy
[2] Università degli studi di Pavia, Italy

In recent years the thermal behavior of electric machines is an attractive research topic. Due to the complexity of the problem, several approaches that exploit FEM analysis have been developed and presented in literature. In this research a 3D thermo-fluid dynamic simulation of an ... En savoir plus

Finite Element Modeling of Conventional and Pulsed Eddy Current Probes for CANDU® Fuel Channel Inspection

M. Luloff[1], J. Morelli[1], T. W. Krause[2]
[1]Department of Physics, Engineering Physics & Astronomy, Queen's University, Kingston, ON, Canada
[2]Department of Physics, Royal Military College of Canada, Kingston, ON, Canada

A pulsed Eddy Current (EC) probe, using the transient response to a stepped voltage is being developed for in-reactor inspection of CANDU® fuel channels. Pulsed EC has the advantage of generating a spectrum of discrete frequencies, allowing the simultaneous collection of data from a ... En savoir plus

DPF Regeneration using MW

N. Manivannan [1], N. Alozie [1], D. Brennan [1], M. Abbod [1], W. Balachandran [1]
[1]Brunel University, Kingston Road, Uxbridge, United Kingdom

A new microwave cavity for the regeneration of DPF regeneration was proposed and COMSOL Multiphysics® FEM model was used to investigate heating properties of the Silicon Carbide (SiC) based DPF. Electric field profile and thermal profile of the microwave cavity and DPF was established ... En savoir plus

Improved Understanding on Collection of Airborne Particles by Permanent Magnetic Assembly

M. Cheng [1], B. L. Murphy [1], G. M. Ludtka [1], P. Cable-Dunlap [1],
[1] Oak Ridge National Laboratory, Oak Ridge, TN, USA

Magnetic nanoparticles have diverse applications ranging from contamination control to medical diagnosis and treatment. Small airborne particulate matter (PM) is known to have adverse impacts to human health,, due to its high mobility when penetrating human respiratory systems [1,2,3]. ... En savoir plus

Multiphysics Modeling of the Graphite Electrode Joint in Electric Arc Furnaces for Steel Recycling

N. May [1], M. Waldner [2],
[1] GrafTech International Holdings, Inc., Independence, OH, USA
[2] Case Western Reserve University, Cleveland, OH, USA

Electric Arc Furnaces (EAF) use graphite electrodes to strike an arc to melt scrap steel, recycling it for further use. These graphite electrodes oxidize and are consumed over time. To maintain operation new electrodes are attached to others via a joint of complex geometry and fed ... En savoir plus

Premier

791–800 of 1172

Dernier