Particle Tracing in a Micromixer
Application ID: 12151
Micromixers can either be static or dynamic depending on the required mixing time and length scale. For static mixers, the Reynolds number has to be suitable high to induce turbulence enhanced mixing. Often micromixers operate in the laminar flow regime due to their small characteristic size. The diffusivity of a solute in the flowing fluid may also be extremely small, on the order of 10?10m2/s. This results in mixing length scales on the order of meters—clearly unacceptable for a microscale device. Static mixers try to alleviate the problem by adding mixing elements to induce vorticity into the flow. A dynamic mixer uses rotating blades to enhance the mixing process, allowing for smaller scale devices. The one big disadvantage of a dynamic mixer is that moving parts are required. This model uses the Rotating Machinery, Laminar Flow and Particle Tracing for Fluid Flow interfaces.
This model example illustrates applications of this type that would nominally be built using the following products:CFD Module Particle Tracing Module
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Grille de spécifications and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.